From bugzilla-daemon at maemo.org Fri Aug 1 04:14:41 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 04:14:41 +0300 (EEST) Subject: [hafqa] [Bug 2879] osso-gpsd source is 1.0-23, binary 1.0-25 In-Reply-To: Message-ID: <20080801011441.6DAEF118E81@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2879 ------- Comment #4 from rabelg5 at gmail.com 2008-08-01 04:14 GMT+3 ------- (In reply to comment #3) > Closing as INVALID as it's definitely available in the correct location in my > opinion. > This is probably more correctly closed as FIXED, as this has to do with the 4.0.1 release being out of sync for the 50-2 release. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2879 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 06:17:02 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 06:17:02 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080801031702.E35A3118E81@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 ------- Comment #2 from inderjeet.sharma at rediffmail.com 2008-08-01 06:17 GMT+3 ------- Sorry for the confusion.. I am using Diablo SDK with version 4.1 Please note that this bug is reproducible even in X86 platform. Do I need to log it somewhere else?? If yes please let me know where. (In reply to comment #1) > SOFTWARE VERSION:gtk 2.0 > (Control Panel > General > About product) > That is a bit confusing... Which SDK version is this? 4.1 for Diablo? Note that > the version "2.0" in this bugzilla does not refer to gtk+. :-) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 14:17:16 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 14:17:16 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080801111716.D86DD118A26@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias| |int-87288 Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 16:50:12 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 16:50:12 +0300 (EEST) Subject: [hafqa] [Bug 2406] word history suggestions missing when using "Custom/Empty" base dictionary In-Reply-To: Message-ID: <20080801135012.67E8811AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2406 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Status|NEW |RESOLVED Resolution| |WORKSFORME ------- Comment #1 from aklapper at openismus.com 2008-08-01 16:50 GMT+3 ------- Running Diablo on N810, I cannot reproduce this. I set the first dictionary to Empty and the second one to english. After typing "hello" once in Notes, after typing "he" for a second time it is proposed. Closing as WORKSFORME, if I misunderstoof something or if you can still reproduce this, please reopen. Thanks! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2406 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 16:51:06 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 16:51:06 +0300 (EEST) Subject: [hafqa] [Bug 2247] No way to clear/reset word prediction dictionary In-Reply-To: Message-ID: <20080801135106.CE1B111A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2247 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|normal |enhancement Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 Version|3.2 |4.1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2247 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 17:08:37 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 17:08:37 +0300 (EEST) Subject: [hafqa] [Bug 2259] can't use dash and ogonek as dead keys In-Reply-To: Message-ID: <20080801140837.D68BF11AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2259 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com ------- Comment #1 from aklapper at openismus.com 2008-08-01 17:08 GMT+3 ------- > Define a virtual keyboard with / as dead key. If I only had an N800... How can I try to reproduce this with Diablo? Any step-by-step explanation, or a test file with instructions? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2259 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 17:37:28 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 17:37:28 +0300 (EEST) Subject: [hafqa] [Bug 2281] Accelerator Labels not shown in menus created with GtkUIManager In-Reply-To: Message-ID: <20080801143728.EEDAE11A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2281 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias| |int-87292 ------- Comment #13 from aklapper at openismus.com 2008-08-01 17:37 GMT+3 ------- Now is this a downstream (Maemo) only gtk issue, or would it also make sense to get this in upstream? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2281 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 17:42:29 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 17:42:29 +0300 (EEST) Subject: [hafqa] [Bug 3532] New: Bluetooth Keyboard input not accepted after connect: Can't Type Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3532 Summary: Bluetooth Keyboard input not accepted after connect: Can't Type Product: System software Version: 4.1 Platform: N800 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: High Component: Input method framework AssignedTo: mdamt at maemo.org ReportedBy: cvmiller at gmail.com QAContact: input-method-framework-bugs at maemo.org SOFTWARE VERSION: (Control Panel > General > About product) OS2008 Version 4.2008.23-14 (Diablo) STEPS TO REPRODUCE THE PROBLEM: Connect BT keyboard and start typing. Disconnect BT keyboard. Repeat approximately 15-20 times. Only known solution is to reboot N800. EXPECTED OUTCOME: BT icon turns blue, show that it is connected. Keys typed appear on screen in application (ie. xterm) ACTUAL OUTCOME: BT icon turns blue, show that it is connected, but no characters appear in application (ie. xterm) REPRODUCIBILITY: (always/sometimes/once) Always. EXTRA SOFTWARE INSTALLED: None required. OTHER COMMENTS: User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.8.1.16) Gecko/20080702 Firefox/2.0.0.16 This may be an error in net/bluetooth/hidp/core.c The kernel thread khidpd_... can be seen running, however keypresses on the BT keyboard are not making it to the application. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 18:14:55 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 18:14:55 +0300 (EEST) Subject: [hafqa] [Bug 2322] Incorrect D-Bus interface/namespace usage for org.freedesktop.Notifications extensions In-Reply-To: Message-ID: <20080801151455.3460811A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2322 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|carlos at maemo.org |kimmo.hamalainen at nokia.com QAContact|hafqa at maemo.org |libosso-bugs at maemo.org -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2322 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 18:55:25 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 18:55:25 +0300 (EEST) Subject: [hafqa] [Bug 2394] n800 it2008 osk has different repeat behaviour In-Reply-To: Message-ID: <20080801155525.7A766118ECF@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2394 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Keywords| |moreinfo ------- Comment #2 from aklapper at openismus.com 2008-08-01 18:55 GMT+3 ------- Hi Keed, is this still an issue on Diablo or has it improved? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2394 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 1 19:04:04 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 1 Aug 2008 19:04:04 +0300 (EEST) Subject: [hafqa] [Bug 2397] if browser crashes no message is displayed In-Reply-To: Message-ID: <20080801160404.DEA5B118E7F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2397 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Severity|normal |minor Component|general |User interface Product|System software |Browser ------- Comment #2 from aklapper at openismus.com 2008-08-01 19:04 GMT+3 ------- Looks pretty WONTFIX to me, though of course having a "Browser has quit unexpectedly" message would be an option. With regard to the crash itself: If you can still reproduce that one Diablo, please enter about:config?prefname=browser.consolelogfile&prefvalue=/tmp/browserlog in the browser location bar, set that preference, reproduce the browser problem and post the content of the file /tmp/browserlog here (you can for example start the terminal application, run "more /tmp/browserlog" and copy the output to this bug report). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2397 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 2 16:25:30 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 2 Aug 2008 16:25:30 +0300 (EEST) Subject: [hafqa] [Bug 3407] Input language switching does not work in browser entry fields In-Reply-To: Message-ID: <20080802132530.45EA011A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3407 ------- Comment #7 from maemo at subs.maneos.org 2008-08-02 16:25 GMT+3 ------- I just discovered /usr/bin/hildon-im-xkbtool, which came in package hildon-im-wc, ("Western word completion plugin for slide keyboard") of all things. With it I can switch slide keyboard layouts from the command line (yay!), for example: hildon-im-xkbtool --id=3 -l gr -m pc105 but there are some side effects: - FN, CHR, & SHIFT-SPACE stop working - the D-pad middle button becomes an ENTER key Launching the text input settings control panel applet and tapping OK resets the keyboard state. The side effects may be due to "pc105" being the wrong keyboard model. The correct one seems to be "nokiarx44": ~ $ hildon-im-xkbtool -g Internal keyboard: Model: nokiarx44 Layout: us Delay: 600 Interval: 50 but specifying that fails with "GLIB WARNING ** default - Error loading keyboard description". The only models defined /usr/share/X11/xkb/rules/base* are "pc105" and "nokiasu8w". xev shows these events for FN & CHR respectively under normal conditions: KeyPress event, serial 20, synthetic NO, window 0x1e00001, root 0x3e, subw 0x0, time 2206035085, (655,-33), root:(735,27), state 0x0, keycode 216 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES, XLookupString gives 0 characters: "" KeyPress event, serial 23, synthetic NO, window 0x1e00001, root 0x3e, subw 0x0, time 2206041322, (655,-33), root:(735,27), state 0x0, keycode 135 (keysym 0xff20, Multi_key), same_screen YES, XLookupString gives 0 characters: "" but these when switched with hildon-im-xkbtool (both pc105 & nokiasu8w models give the same results): KeyPress event, serial 20, synthetic NO, window 0x1e00001, root 0x3e, subw 0x0, time 2206169688, (655,-33), root:(735,27), state 0x0, keycode 216 (keysym 0x0, NoSymbol), same_screen YES, XLookupString gives 0 characters: "" KeyPress event, serial 23, synthetic NO, window 0x1e00001, root 0x3e, subw 0x0, time 2206171240, (655,-33), root:(735,27), state 0x0, keycode 135 (keysym 0xff67, Menu), same_screen YES, XLookupString gives 0 characters: "" -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3407 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 2 17:43:26 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 2 Aug 2008 17:43:26 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080802144326.A5393118E9F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Keywords| |moreinfo Priority|High |Medium ------- Comment #1 from aklapper at openismus.com 2008-08-02 17:43 GMT+3 ------- Thanks for the report. Is there any error message displayed? What exact manufacturer and modell is this? Could you maybe provide a syslog and a hcidump (package "bluez-hcidump", also see http://maemo.org/development/documentation/man_pages/hcidump.html ) of the problematic situation? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 2 19:43:49 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 2 Aug 2008 19:43:49 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080802164349.2F240118ECF@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #2 from cvmiller at gmail.com 2008-08-02 19:43 GMT+3 ------- Created an attachment (id=854) --> (https://bugs.maemo.org/attachment.cgi?id=854&action=view) hcidump of BT keyboard pairing, but not typing -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 2 19:45:01 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 2 Aug 2008 19:45:01 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080802164501.C4EEA118E9F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #3 from cvmiller at gmail.com 2008-08-02 19:45 GMT+3 ------- BT Keyboard is an iGo (Stowaway Ultra-Slim). This was not a problem with OS2007 using the same keyboard and N800. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 2 19:46:36 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 2 Aug 2008 19:46:36 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080802164636.91B8E118E9F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #4 from cvmiller at gmail.com 2008-08-02 19:46 GMT+3 ------- Sorry, meant to add this to the previous note. There are no error messages on the screen, or in dmesg. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sun Aug 3 02:25:27 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sun, 3 Aug 2008 02:25:27 +0300 (EEST) Subject: [hafqa] [Bug 2406] word history suggestions missing when using "Custom/Empty" base dictionary In-Reply-To: Message-ID: <20080802232527.7555511A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2406 tuukka.tolvanen at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |VERIFIED ------- Comment #2 from tuukka.tolvanen at gmail.com 2008-08-03 02:25 GMT+3 ------- v wfm RX-34_DIABLO_4.2008.23-14 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2406 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 4 08:10:28 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 4 Aug 2008 08:10:28 +0300 (EEST) Subject: [hafqa] [Bug 2394] Unpredictable finger-keyboard repeat behaviour In-Reply-To: Message-ID: <20080804051028.BB1EB118E8D@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2394 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Input method framework |Finger keyboard Summary|n800 it2008 osk has |Unpredictable finger- |different repeat behaviour |keyboard repeat behaviour ------- Comment #3 from rabelg5 at gmail.com 2008-08-04 08:10 GMT+3 ------- This one is probably FIXED or maybe DUPLICATE of one of the other text input bugs (too lazy to search at the moment), but is almost definitely fixed in Diablo. I'll wait for Kees to chime in, though. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2394 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 4 10:33:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 4 Aug 2008 10:33:10 +0300 (EEST) Subject: [hafqa] [Bug 2394] Unpredictable finger-keyboard repeat behaviour In-Reply-To: Message-ID: <20080804073310.73B8C11AABA@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2394 ------- Comment #4 from kees.jongenburger at gmail.com 2008-08-04 10:33 GMT+3 ------- hello , i have not used diabolo on the n800. On chinhook the issue was solved so i think we can safely close the bug as it appears to be only present in the beta. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2394 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 4 15:56:52 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 4 Aug 2008 15:56:52 +0300 (EEST) Subject: [hafqa] [Bug 901] osso_thumbnail_factory_load() needs destroy callback In-Reply-To: Message-ID: <20080804125652.5596C118ECF@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=901 ------- Comment #6 from aklapper at openismus.com 2008-08-04 15:56 GMT+3 ------- Marius: any news here? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=901 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 4 16:34:36 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 4 Aug 2008 16:34:36 +0300 (EEST) Subject: [hafqa] [Bug 2070] When application lasts on respond, long ESC keypress could not work or short ESC keypress could close the app. In-Reply-To: Message-ID: <20080804133436.60F66118E81@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2070 ------- Comment #11 from aklapper at openismus.com 2008-08-04 16:34 GMT+3 ------- (In reply to comment #10) > Andre, I'm not sure if I've understand your request. In general, my request is to have a valid patch that can be applied to the current Diablo codebase, so we can get this in and close this report. Just trying to clean up the patch database in maemo Bugzilla. ;-) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2070 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 4 23:25:54 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 4 Aug 2008 23:25:54 +0300 (EEST) Subject: [hafqa] [Bug 2723] Pushing key once causes multiple repeats In-Reply-To: Message-ID: <20080804202554.37D5111AABA@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2723 ------- Comment #11 from jamie.bennett at gmail.com 2008-08-04 23:25 GMT+3 ------- This has been around for quite some time and lots of users have reported this in one form or another. This is related to the scrollbar issue too if I'm not mistaken, i.e. tap and hold the scroll bar down/up arrow in microb and it scrolls for ever sometimes. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2723 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 5 15:00:15 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 5 Aug 2008 15:00:15 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080805120015.6020F11A8F0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- Component|gtk |window-manager ------- Comment #3 from eero.tamminen at nokia.com 2008-08-05 15:00 GMT+3 ------- Dialogs are positioned by window-manager unless application specifies the co-ordinates itself (in which case WM doesn't change the position), moving to correct component. (Regarding severity, I don't see how dialog positioning would be major loss of functionality. It would also be preferable for test code to be in attachments, that makes them to easier to handle and the bug more readable.) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 5 15:07:02 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 5 Aug 2008 15:07:02 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080805120702.A5530118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|major |normal Version|2.0 |4.1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 5 17:17:08 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 5 Aug 2008 17:17:08 +0300 (EEST) Subject: [hafqa] [Bug 3501] hildon_window_update_topmost() should handle/ignore windows that haven't been realized In-Reply-To: Message-ID: <20080805141708.4EF82C131B@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3501 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eero.tamminen at nokia.com Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 Keywords| |easyfix Summary|hildon_window_update_topmost|hildon_window_update_topmost |() does not check for |() should handle/ignore |invisible windows |windows that haven't been | |realized ------- Comment #3 from eero.tamminen at nokia.com 2008-08-05 17:17 GMT+3 ------- (In reply to comment #0) > I've replaced gtk_window_new() calls with hildon_window_new() calls, and added > hildon_program_add_window() calls right after creating the window. However, > when I run the application, I always get the following warning during startup: > > GLIB WARNING ** Gdk - gdkdrawable-x11.c:878 drawable is not a pixmap or window > > I've debugged the problem down to hildon-window.c, function > hildon_window_update_topmost. It contains a line: > > my_window = GDK_WINDOW_XID (GTK_WIDGET(self)->window); I looked into code and this seems a clear bug. I've seen this warning also in logs from our apps, maybe the cause is the same. > Problem is, when it's called for the window that wasn't yet mapped > (hildon_window_realize() was not called), the 'window' field in > GtkWidget is zero, this GDK_WINDOW_XID call will emit a warning. > > I think hildon_window_update_topmost() should ignore invisible widgets at all. A check for "GTK_WIDGET_REALIZED(self)" or "self->window" in line 1466 libhildon::hildon-window.c should be enough: -------------------------------------------- 1456 void 1457 hildon_window_update_topmost (HildonWindow *self, 1458 Window window_id) 1459 { 1460 HildonWindowPrivate *priv = HILDON_WINDOW_GET_PRIVATE (self); 1461 1462 Window my_window; 1463 1464 g_return_if_fail (HILDON_IS_WINDOW (self)); 1465 g_assert (priv); 1466 1467 my_window = GDK_WINDOW_XID (GTK_WIDGET (self)->window); -------------------------------------------- Thanks! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3501 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 07:37:02 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 07:37:02 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080806043702.A99DD118A5F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 ------- Comment #4 from inderjeet.sharma at rediffmail.com 2008-08-06 07:37 GMT+3 ------- Created an attachment (id=861) --> (https://bugs.maemo.org/attachment.cgi?id=861&action=view) testcase(executable) to reproduce problem in device ARM executable -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 07:39:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 07:39:10 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080806043910.6D663118A5F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 ------- Comment #5 from inderjeet.sharma at rediffmail.com 2008-08-06 07:39 GMT+3 ------- Created an attachment (id=862) --> (https://bugs.maemo.org/attachment.cgi?id=862&action=view) testcase(executable) to reproduce problem in Host machine X86 executable -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 07:40:17 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 07:40:17 +0300 (EEST) Subject: [hafqa] [Bug 3522] Dialog coordinates calculation issue while switching from Fullscreen to Unfullscreen mode In-Reply-To: Message-ID: <20080806044017.135BE118A4A@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3522 ------- Comment #6 from inderjeet.sharma at rediffmail.com 2008-08-06 07:40 GMT+3 ------- Created an attachment (id=863) --> (https://bugs.maemo.org/attachment.cgi?id=863&action=view) C-file(testcase code) C code -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3522 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 13:25:51 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 13:25:51 +0300 (EEST) Subject: [hafqa] [Bug 2281] Accelerator Labels not shown in menus created with GtkUIManager In-Reply-To: Message-ID: <20080806102551.496C8C90F3@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2281 christian at imendio.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |christian at imendio.com ------- Comment #14 from christian at imendio.com 2008-08-06 13:25 GMT+3 ------- (In reply to comment #13) > Now is this a downstream (Maemo) only gtk issue, or would it also make sense to > get this in upstream? Patch was filed against and is being worked on for inclusion in upstream Gtk+. See http://bugzilla.gnome.org/show_bug.cgi?id=516425 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2281 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 15:21:25 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 15:21:25 +0300 (EEST) Subject: [hafqa] [Bug 924] Hildon widgets doesn't support RTL mode In-Reply-To: Message-ID: <20080806122125.ECE92F9386@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=924 ------- Comment #18 from sven at imendio.com 2008-08-06 15:21 GMT+3 ------- Hi Khaled, (In reply to comment #16) > But there are two issues that I spotted, in the hildon_bread_crumb_trail widget > the bar is slightly shifted to the left getting out of the window. Thanks for looking into this: unfortunately I don't get this reproduced right now. Can you provide instructions how to reproduce this? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=924 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 6 17:12:30 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 6 Aug 2008 17:12:30 +0300 (EEST) Subject: [hafqa] [Bug 924] Hildon widgets doesn't support RTL mode In-Reply-To: Message-ID: <20080806141230.AB6E21B817D@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=924 ------- Comment #19 from sven at imendio.com 2008-08-06 17:12 GMT+3 ------- To be more specific: how do I create one of those: open("/usr/lib/locale/ar_AE.UTF-8/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/locale/ar_AE.utf8/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/locale/ar_AE/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/locale/ar.UTF-8/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/locale/ar.utf8/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/locale/ar/LC_IDENTIFICATION", O_RDONLY) = -1 ENOENT (No such file or directory) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=924 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 7 12:38:30 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 7 Aug 2008 12:38:30 +0300 (EEST) Subject: [hafqa] [Bug 3501] hildon_window_update_topmost() should handle/ignore windows that haven't been realized In-Reply-To: Message-ID: <20080807093830.7E1AAF9384@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3501 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias| |int-78752 Target Milestone|--- |Fremantle ------- Comment #4 from eero.tamminen at nokia.com 2008-08-07 12:38 GMT+3 ------- was already internally reported with a patch... -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3501 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 7 14:33:45 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 7 Aug 2008 14:33:45 +0300 (EEST) Subject: [hafqa] [Bug 2281] Accelerator Labels not shown in menus created with GtkUIManager In-Reply-To: Message-ID: <20080807113345.6E220F9384@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2281 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|Medium |Low Target Milestone|--- |Fremantle Version|4.0 |4.1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2281 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 7 15:26:19 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 7 Aug 2008 15:26:19 +0300 (EEST) Subject: [hafqa] [Bug 2879] osso-gpsd source is 1.0-23, binary 1.0-25 In-Reply-To: Message-ID: <20080807122620.0392FC1367@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2879 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|INVALID | -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2879 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 7 15:26:28 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 7 Aug 2008 15:26:28 +0300 (EEST) Subject: [hafqa] [Bug 2879] osso-gpsd source is 1.0-23, binary 1.0-25 In-Reply-To: Message-ID: <20080807122628.D155AC1362@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2879 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |FIXED -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2879 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 8 12:29:37 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 8 Aug 2008 12:29:37 +0300 (EEST) Subject: [hafqa] [Bug 3407] Input language switching does not work in browser entry fields In-Reply-To: Message-ID: <20080808092937.D63FDC144F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3407 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED ------- Comment #8 from aklapper at openismus.com 2008-08-08 12:29 GMT+3 ------- Comment 2 was incorrect here, but this now has been fixed internally. The next release of hildon-input-method-plugins will include the fix. Please verify that it's fixed for you after it has been released. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3407 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 12:16:42 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 12:16:42 +0300 (EEST) Subject: [hafqa] [Bug 2281] Accelerator Labels not shown in menus created with GtkUIManager In-Reply-To: Message-ID: <20080811091642.6726DD9659@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2281 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias|int-87292 |int-87441 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2281 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 12:17:45 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 12:17:45 +0300 (EEST) Subject: [hafqa] [Bug 3501] hildon_window_update_topmost() should handle/ignore windows that haven't been realized In-Reply-To: Message-ID: <20080811091745.6F7DFD965B@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3501 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias|int-78752 |int-87442 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3501 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 12:21:26 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 12:21:26 +0300 (EEST) Subject: [hafqa] [Bug 924] Hildon widgets doesn't support RTL mode In-Reply-To: Message-ID: <20080811092126.0EEBD118A5F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=924 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Status|RESOLVED |REOPENED Resolution|FIXED | Version|sardine |4.1 ------- Comment #20 from aklapper at openismus.com 2008-08-11 12:21 GMT+3 ------- Reopening as internal ticket is still open too. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=924 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 13:41:58 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 13:41:58 +0300 (EEST) Subject: [hafqa] [Bug 3407] Input language switching does not work in browser entry fields In-Reply-To: Message-ID: <20080811104158.43B78D9659@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3407 ------- Comment #9 from maemo at subs.maneos.org 2008-08-11 13:41 GMT+3 ------- (In reply to comment #8) > The next release of hildon-input-method-plugins will include the fix. Is that the correct package name? It doesn't seem to exist. The closest I can find is hildon-input-method-plugins-western, which doesn't actually contain anything. > Please verify that it's fixed for you after it has been released. FWIW, I see no change in 4.2008.30-2. Was today's update supposed to contain the fix, or should we wait some more? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3407 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 14:31:36 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 14:31:36 +0300 (EEST) Subject: [hafqa] [Bug 3407] Input language switching does not work in browser entry fields In-Reply-To: Message-ID: <20080811113136.39E2AD9683@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3407 ------- Comment #10 from aklapper at openismus.com 2008-08-11 14:31 GMT+3 ------- (In reply to comment #9) > FWIW, I see no change in 4.2008.30-2. Was today's update supposed to contain > the fix, or should we wait some more? It's not in today's update, unfortunately - this was fixed after week 30. See the "30" in the name of the update - now it's week 33 that the update has been made available. No idea when the next update will be made available, I'm not involved in that process. :-/ -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3407 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 15:26:47 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 15:26:47 +0300 (EEST) Subject: [hafqa] [Bug 924] Hildon widgets doesn't support RTL mode In-Reply-To: Message-ID: <20080811122647.946BEC139C@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=924 sven at imendio.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |FIXED ------- Comment #21 from sven at imendio.com 2008-08-11 15:26 GMT+3 ------- Thanks, but please let's verify things before reopening. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=924 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 21:57:11 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 21:57:11 +0300 (EEST) Subject: [hafqa] [Bug 2770] /dev/urandom produces predictable data just after boot In-Reply-To: Message-ID: <20080811185711.B455FD9692@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2770 ------- Comment #13 from bugzilla770 at nmacleod.com 2008-08-11 21:57 GMT+3 ------- Can this be given a target milestone, 4.1+ or Freemantle perhaps? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2770 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 11 22:01:24 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 11 Aug 2008 22:01:24 +0300 (EEST) Subject: [hafqa] [Bug 2770] /dev/urandom produces predictable data just after boot In-Reply-To: Message-ID: <20080811190124.9625CD9692@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2770 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|--- |Fremantle ------- Comment #14 from aklapper at openismus.com 2008-08-11 22:01 GMT+3 ------- (In reply to comment #13) > Can this be given a target milestone, 4.1+ or Freemantle perhaps? Thanks for the ping. This bug is being worked on, but I have no idea whether shipping an update for Diablo including this fix is planned by Nokia or not. Investigations seem to be a bit more complicated (kernel bugs), but it will definitely be fixed for Fremantle. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2770 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 12 05:52:24 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 12 Aug 2008 05:52:24 +0300 (EEST) Subject: [hafqa] [Bug 3226] /usr/include/location/* headers need to be extern "C" In-Reply-To: Message-ID: <20080812025224.CB5AE1183E8@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3226 ------- Comment #2 from Tao.Wu at plenware.com 2008-08-12 05:52 GMT+3 ------- i can't reproduce this,could you give more detail about this bug or steps?thanks a lot~ -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3226 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 12 17:27:06 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 12 Aug 2008 17:27:06 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080812142706.BA4F5118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords|moreinfo | ------- Comment #5 from aklapper at openismus.com 2008-08-12 17:27 GMT+3 ------- (In reply to comment #3) > BT Keyboard is an iGo (Stowaway Ultra-Slim). Reference for other readers: Bug 2616 is related. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 13 07:45:39 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 13 Aug 2008 07:45:39 +0300 (EEST) Subject: [hafqa] [Bug 3501] hildon_window_update_topmost() should handle/ignore windows that haven't been realized In-Reply-To: Message-ID: <20080813044539.2EDDEF93AE@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3501 ------- Comment #5 from Jianjun.Yu at plenware.com 2008-08-13 07:45 GMT+3 ------- Can you share your test code ? Thanks! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3501 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 14 16:26:58 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 14 Aug 2008 16:26:58 +0300 (EEST) Subject: [hafqa] [Bug 1131] standard user process environment lacks variables: USER, LOGNAME, SHELL In-Reply-To: Message-ID: <20080814132658.6CFCBD96C1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=1131 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|4.1+ |4.1.1 ------- Comment #7 from aklapper at openismus.com 2008-08-14 16:26 GMT+3 ------- Fix is included in 4.2008.30-2, hence setting Target Milestone correctly to 4.1.1. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=1131 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 14 21:29:37 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 14 Aug 2008 21:29:37 +0300 (EEST) Subject: [hafqa] [Bug 3583] New: libhildonmime fails to build due to variable format strings Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3583 Summary: libhildonmime fails to build due to variable format strings Product: System software Version: unspecified Platform: All OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: Low Component: general AssignedTo: nobody at maemo.org ReportedBy: lool at dooz.org QAContact: hafqa at maemo.org Hi, libhildonmime fails to build with some -Wformat* gcc flag which is in use in Ubuntu by default (for security purposes): /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../libhildonmime -DPREFIX=\"/usr\" -DGLOBS_FILE_PATH=\"/usr/share/mime/globs\" -Wall -Wunused -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-compare -Wno-pointer-sign -Werror -pthread -DORBIT2=1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/gnome-vfs-module-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -g -O2 -g -O2 -MT libhildonmime_la-hildon-uri.lo -MD -MP -MF .deps/libhildonmime_la-hildon-uri.Tpo -c -o libhildonmime_la-hildon-uri.lo `test -f 'hildon-uri.c' || echo './'`hildon-uri.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../libhildonmime -DPREFIX=\"/usr\" -DGLOBS_FILE_PATH=\"/usr/share/mime/globs\" -Wall -Wunused -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-compare -Wno-pointer-sign -Werror -pthread -DORBIT2=1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/gnome-vfs-module-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -g -O2 -g -O2 -MT libhildonmime_la-hildon-uri.lo -MD -MP -MF .deps/libhildonmime_la-hildon-uri.Tpo -c hildon-uri.c -fPIC -DPIC -o .libs/libhildonmime_la-hildon-uri.o cc1: warnings being treated as errors hildon-uri.c: In function ?hildon_uri_get_scheme_from_uri?: hildon-uri.c:1714: error: format not a string literal and no format arguments hildon-uri.c: In function ?hildon_uri_open?: hildon-uri.c:2295: error: format not a string literal and no format arguments hildon-uri.c:2351: error: format not a string literal and no format arguments hildon-uri.c:2379: error: format not a string literal and no format arguments make[3]: *** [libhildonmime_la-hildon-uri.lo] Erreur 1 This is because of calls to printf with a variable string as argument. I'll attach the patch we use to fix the build for us. I checked the relevant code, and the strings in use are fine; there's probably no security issue here. Bye, -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 14 21:30:33 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 14 Aug 2008 21:30:33 +0300 (EEST) Subject: [hafqa] [Bug 3583] libhildonmime fails to build due to variable format strings In-Reply-To: Message-ID: <20080814183033.53324C1444@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3583 ------- Comment #1 from lool at dooz.org 2008-08-14 21:30 GMT+3 ------- Created an attachment (id=872) --> (https://bugs.maemo.org/attachment.cgi?id=872&action=view) Format string fixes; use "%s" explicitely -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 14 21:31:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 14 Aug 2008 21:31:10 +0300 (EEST) Subject: [hafqa] [Bug 3583] libhildonmime fails to build due to variable format strings In-Reply-To: Message-ID: <20080814183110.7A990C1444@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3583 ------- Comment #2 from lool at dooz.org 2008-08-14 21:31 GMT+3 ------- NB: actual patch was provided by Steve Kowalik. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 09:24:06 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 09:24:06 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080815062406.C9B5611A940@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #3 from Jianjun.Yu at plenware.com 2008-08-15 09:24 GMT+3 ------- Can you point out the application which use glade_xml_construct_from_buffer ? Thanks! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 12:18:34 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 12:18:34 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080815091834.3DA16C1A59@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #4 from murrayc at murrayc.com 2008-08-15 12:18 GMT+3 ------- (In reply to comment #3) > Can you point out the application which use glade_xml_construct_from_buffer ? libglademm. It's a library, not an application. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 13:57:51 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 13:57:51 +0300 (EEST) Subject: [hafqa] [Bug 3583] libhildonmime fails to build due to variable format strings In-Reply-To: Message-ID: <20080815105751.4033211A940@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3583 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com ------- Comment #3 from aklapper at openismus.com 2008-08-15 13:57 GMT+3 ------- I assume this is about libhildonmime 2.0.2-1? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 14:10:46 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 14:10:46 +0300 (EEST) Subject: [hafqa] [Bug 3583] libhildonmime fails to build due to variable format strings In-Reply-To: Message-ID: <20080815111046.A765111A940@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3583 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Alias| |int-87567 Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 Keywords| |patch Version|unspecified |4.1.1 ------- Comment #4 from aklapper at openismus.com 2008-08-15 14:10 GMT+3 ------- Ah, libhildonmime-1.10.1, and this is still valid in Diablo's 2.0.2-1 (just took a look at the code) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 15:36:34 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 15:36:34 +0300 (EEST) Subject: [hafqa] [Bug 3583] libhildonmime fails to build due to variable format strings In-Reply-To: Message-ID: <20080815123634.4C1AE1185E0@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3583 ------- Comment #5 from lool at dooz.org 2008-08-15 15:36 GMT+3 ------- We're indeed using 1.10.1, but I checked SVN yesterday when reporting the bug and saw some calls without the clarifying "%s" (2.0.2). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3583 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 17:19:33 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 17:19:33 +0300 (EEST) Subject: [hafqa] [Bug 3590] New: gnomevfs code enables infinite loop Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3590 Summary: gnomevfs code enables infinite loop Product: System software Version: 4.1.1 Platform: All URL: http://mxr.maemo.org/diablo-20080625/source/osso-gnome- vfs2-2.16.3/modules/file-method.c?mark=1052- 1055,1083,1088-1091#1051 OS/Version: IT OS Status: UNCONFIRMED Severity: major Priority: Medium Component: gnomevfs AssignedTo: kimmo.hamalainen at nokia.com ReportedBy: timeless at gmail.com QAContact: gnomevfs-bugs at maemo.org CC: kaie at kuix.de OtherBugsDependingO 3588 nThis: sample code: get_deadlocked (GnomeVFSURI *uri) { GnomeVFSDirectoryHandle *handle; GnomeVFSResult result; GnomeVFSFileInfo *file_info; result = gnome_vfs_directory_open_from_uri ( &handle, uri, GNOME_VFS_FILE_INFO_FORCE_FAST_MIME_TYPE ); if (result != GNOME_VFS_OK) { return NULL; } file_info = gnome_vfs_file_info_new (); while (1) { result = gnome_vfs_directory_read_next ( handle, file_info ); if (result == GNOME_VFS_ERROR_EOF) { break; } else if (result != GNOME_VFS_OK) { /* Couldn't read. */ continue; ... the problem case is that gnomevfs could fail because there are too many open files. if it fails, it doesn't increment a counter such that it could reach EOF, but instead should fail exactly the same way the next time. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3590 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 15 18:17:15 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 15 Aug 2008 18:17:15 +0300 (EEST) Subject: [hafqa] [Bug 3590] gnomevfs code enables infinite loop In-Reply-To: Message-ID: <20080815151715.379CEC13AD@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3590 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eero.tamminen at nokia.com -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3590 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 01:51:51 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 01:51:51 +0300 (EEST) Subject: [hafqa] [Bug 3601] New: rhapsody-installer does not own .desktop file Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3601 Summary: rhapsody-installer does not own .desktop file Product: System software Version: 4.1.1 Platform: All OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: Low Component: general AssignedTo: nobody at maemo.org ReportedBy: josh at freedesktop.org QAContact: hafqa at maemo.org SOFTWARE VERSION: 4.2008.30-2 The rhapsody-installer package (version 0.16) does not actually contain the rhapsody .desktop file under /usr/share/applications ; that file doesn't seem to belong to any package. That .desktop file should get installed as part of the rhapsody-installer package, so that the package manager knows about it and manages it with the rhapsody-installer package. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 02:07:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 02:07:10 +0300 (EEST) Subject: [hafqa] [Bug 3602] New: osso-software-version-rx34 AKA "OS2008 Feature Upgrade" dependencies prevent removing many packages Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3602 Summary: osso-software-version-rx34 AKA "OS2008 Feature Upgrade" dependencies prevent removing many packages Product: System software Version: 4.1.1 Platform: All OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: Low Component: general AssignedTo: nobody at maemo.org ReportedBy: josh at freedesktop.org QAContact: hafqa at maemo.org SOFTWARE VERSION: 4.2008.30-2 The metapackage "osso-software-version-rx34", shown in the application installer as "OS2008 Feature Upgrade", provides system update functionality. However, it also depends on numerous packages, many of which I would like to remove. Previous versions of maemo did not complain when I removed these packages, but with this version I cannot remove these packages without removing the osso-software-version-rx34 metapackage and losing system update functionality. Packages I would like to remove: adobe-flashplayer gizmo-installer rhapsody-installer skype-installer promo-applet pre-installed-documentation-rx34 pre-installed-images pre-installed-sounds pre-installed-videos Removing these packages frees up more space and removes menu items I won't ever use. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3602 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 04:01:47 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 04:01:47 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080818010147.A7007118747@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #5 from Jianjun.Yu at plenware.com 2008-08-18 04:01 GMT+3 ------- (In reply to comment #4) > (In reply to comment #3) > > Can you point out the application which use glade_xml_construct_from_buffer ? > > libglademm. It's a library, not an application. > I know it's a library. I need a test code which use glade_xml_construct_from_buffer in order to test the library.I don't understand this function because there are not introduction about this. So if you know this function you can tell me or give me a test code. thanks! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 04:23:31 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 04:23:31 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080818012331.7EE6D118747@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|rhapsody-installer does not |rhapsody-installer does not |own .desktop file |own its .desktop file -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 04:35:42 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 04:35:42 +0300 (EEST) Subject: [hafqa] [Bug 3299] Cannot remove menu entries for partially installed / applications / stubs In-Reply-To: Message-ID: <20080818013542.A35AE118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3299 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |DUPLICATE ------- Comment #1 from rabelg5 at gmail.com 2008-08-18 04:35 GMT+3 ------- I apologize for having to dupe this one, but we've got a lot of these bugs in the tracker and it'll be easier to get the issue resolved if we just have one or two bugs on it with clear explanations of the issue and clear solutions. *** This bug has been marked as a duplicate of bug 2435 *** -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3299 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 04:55:29 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 04:55:29 +0300 (EEST) Subject: [hafqa] [Bug 3602] osso-software-version-rx*4 dependencies prevent removing many unnecessary packages In-Reply-To: Message-ID: <20080818015529.EB2E1C13AB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3602 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eero.tamminen at nokia.com, | |quim.gil at nokia.com, | |urho.konttori at gmail.com Severity|normal |enhancement Status|UNCONFIRMED |NEW Component|general |Application manager Ever Confirmed|0 |1 Product|System software |System management Summary|osso-software-version-rx34 |osso-software-version-rx*4 |AKA "OS2008 Feature Upgrade"|dependencies prevent |dependencies prevent |removing many unnecessary |removing many packages |packages ------- Comment #1 from rabelg5 at gmail.com 2008-08-18 04:55 GMT+3 ------- I was tempted to mark this one as DUPLICATE, since there are a lot of older bugs relating to this (I don't think I found all of them while I was searching, either), but I'd rather use it as the real bug, since it's much clearer about the problem and covers the whole issue. So, I think I have a possible solution to this issue that might be acceptable for Nokia. Obviously, these items may need to be updated with an SSU push, so having osso-software-version depend on them is the easiest path to accomplish this. The problem is, it doesn't leave users a clean option for removing optional cruft without removing their ability to receive SSU updates (and opening them up to a very high probability of reboot loops if they attempt an apt-get upgrade without osso-software-version installed). What if Nokia were to ship two packages that represent the whole of the system? osso-software-version-rx*4, which depends on the required system packages and osso-software-version-rx*4-optional[1], which depended on the commercial installer packages (Gizmo, Rhapsody, Skype) and the bundled documentation and media packages. Then when a user wants these packages removed, they remove them, and osso-software-version-rx*4-optional in the process, meaning they don't get stuck with them again with each SSU push and don't have the SSU system broken for them. Users that don't remove them receive updates to them like normal, with Nokia just having to update osso-software-version-rx*4-optional in addition to the normal one. This would allow users to remove non-core packages (we can argue about what "core" means, I suppose--some people might not consider Modest "core"--but I think we can definitely agree that installer dummies and big bundled media files aren't that), freeing up space and freeing their tablets (from commercial software). Clearly this is a solution that can't be pounded out overnight, but can we at least consider it? [1]This does assume that this arrangement would be acceptable to the providers of Nokia's bundled commercial software, but forcing commercial products on users is quite an Evil thing to do in the open source world. Maybe an osso-software-version-rx*4, an osso-software-version-rx*4-optional (which includes the bundled documentation and media files) and osso-software-version-rx*4-commercial? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3602 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 04:55:43 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 04:55:43 +0300 (EEST) Subject: [hafqa] [Bug 3602] osso-software-version-rx*4 dependencies prevent removing many unnecessary packages In-Reply-To: Message-ID: <20080818015543.7913311AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3602 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- QAContact|hafqa at maemo.org |application-manager- | |bugs at maemo.org -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3602 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 10:23:58 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 10:23:58 +0300 (EEST) Subject: [hafqa] [Bug 3590] gnomevfs code enables infinite loop In-Reply-To: Message-ID: <20080818072358.480C0C135C@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3590 ------- Comment #1 from Fangjun.Peng at plenware.com 2008-08-18 10:23 GMT+3 ------- read one ,close one -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3590 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 10:36:20 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 10:36:20 +0300 (EEST) Subject: [hafqa] [Bug 3590] gnomevfs code enables infinite loop In-Reply-To: Message-ID: <20080818073620.E57F4D96A9@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3590 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com Alias| |int-87586 Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3590 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 12:57:18 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 12:57:18 +0300 (EEST) Subject: [hafqa] [Bug 3605] New: Hildon Window Border Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3605 Summary: Hildon Window Border Product: System software Version: sardine Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: Medium Component: hildon-libs AssignedTo: nobody at maemo.org ReportedBy: khertan at khertan.net QAContact: hildon-libs-bugs at maemo.org SOFTWARE VERSION: Diablo and Chinook STEPS TO REPRODUCE THE PROBLEM: #!/usr/bin/python2.5 import hildon import gtk win = hildon.Window() win.modify_bg(gtk.gdk.Color(200,200,200)) win.set_border_size(0) win.show_all() win = gtk.Window() win.modify_bg(gtk.gdk.Color(200,200,200)) win.set_border_size(0) win.show_all() EXPECTED OUTCOME: We expected that border size of an hildon window could be set, to use all the space available. ACTUAL OUTCOME: A border with about 20px is draw between the window container and the window REPRODUCIBILITY: always, also with compiled application, this isn't related to pygtk. It s just for the example. EXTRA SOFTWARE INSTALLED: OTHER COMMENTS: User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.1) Gecko/2008070208 Firefox/3.0.1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3605 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 13:07:52 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 13:07:52 +0300 (EEST) Subject: [hafqa] [Bug 3605] Allow Hildon window border size to be set In-Reply-To: Message-ID: <20080818100752.87538D965A@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3605 khertan at khertan.net changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Hildon Window Border |Allow Hildon window border | |size to be set -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3605 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 13:09:28 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 13:09:28 +0300 (EEST) Subject: [hafqa] [Bug 3605] Allow Hildon window border size to be set In-Reply-To: Message-ID: <20080818100928.A90C0D965A@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3605 rabelg5 at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|normal |enhancement Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 Priority|Medium |Low -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3605 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 14:43:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 14:43:10 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080818114310.CF359D9684@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #6 from murrayc at murrayc.com 2008-08-18 14:43 GMT+3 ------- (In reply to comment #5) > (In reply to comment #4) > > (In reply to comment #3) > > > Can you point out the application which use glade_xml_construct_from_buffer ? > > > > libglademm. It's a library, not an application. > > > > I know it's a library. I need a test code which use > glade_xml_construct_from_buffer in order to test the library. libglade itself uses this function in glade_xml_new_from_buffer(), so if that's working then it's working. However, there is a small rarely-triggered bug so you should take the new libglade version (2.6.3), which I released today, please. > I don't > understand this function because there are not > introduction about this. There is now some documentation here: http://library.gnome.org/devel/libglade/unstable/GladeXML.html#glade-xml-construct-from-buffer You also sent me two emails about this. Please just use bugzilla. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 14:47:35 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 14:47:35 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080818114735.D357ED9692@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #7 from murrayc at murrayc.com 2008-08-18 14:47 GMT+3 ------- Armin, maybe you could create a small example .c file that shows the use of glade_xml_new_from_buffer(). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 18 22:10:31 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 18 Aug 2008 22:10:31 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080818191031.5ABA811AABA@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #8 from armin at arbur.net 2008-08-18 22:10 GMT+3 ------- Created an attachment (id=881) --> (https://bugs.maemo.org/attachment.cgi?id=881&action=view) Small example using glade_xml_new_from_buffer -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 00:00:57 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 00:00:57 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080818210057.AAF23C12D3@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com ------- Comment #1 from aklapper at openismus.com 2008-08-19 00:00 GMT+3 ------- What leads to your assumption? You're probably right, but I can't try out by uninstalling rhapsody-installer, because it's required by "OS 2008 Feature upgrade" - that's bug 3602. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 04:30:21 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 04:30:21 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080819013021.C4BA31185D5@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #9 from Jianjun.Yu at plenware.com 2008-08-19 04:30 GMT+3 ------- (In reply to comment #8) > Created an attachment (id=881) --> (https://bugs.maemo.org/attachment.cgi?id=881&action=view) [details] > Small example using glade_xml_new_from_buffer > oh, so that's the way it is,I get it. I don't see this usage before, I have just begun to learn libglade. About this bug, I think nokia shuld update libglade(version 2.4.0) to at least 2.6.1 in order to use this function. Thanks a lot! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 13:35:26 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 13:35:26 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080819103526.71763118A49@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #10 from Jianjun.Yu at plenware.com 2008-08-19 13:35 GMT+3 ------- (In reply to comment #2) > libglade has glade_xml_construct_from_buffer only since 2.6.1. This is required > for the C++ wrapper to wrap the costructor that takes a memory buffer instead > of a file name. Currently, that constructor is simply commented out, so the > functionality is not available at all in C++ (well, apart from using the C API > directly). > > I must admit that I don't know of any application using this yet. However, it > might still be confusing that it pops up in the (online) documentation but > isn't available on maemo. > I don't really understand above description.Because I need to write a report to describe the bug your report . So if you give more explanation , I will very appreciate for that. Besides,I want to know the c++ wrapper how to use this function . -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 13:37:50 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 13:37:50 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080819103750.D0E8E11AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #11 from murrayc at murrayc.com 2008-08-19 13:37 GMT+3 ------- (In reply to comment #10) > I don't really understand above description.Because I need to write a report to > describe the bug your report . So if you give more explanation , I will very > appreciate for that. libglademm needs this function to exist in libglade in order to build libglademm. It's that simple. > Besides,I want to know the c++ wrapper how to use this > function . You want to know how to use the part of libglademm that uses this? I can't imagine why that is important to you, but I will attach an example. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 13:56:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 13:56:10 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080819105610.449EDF8D84@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #12 from murrayc at murrayc.com 2008-08-19 13:56 GMT+3 ------- Created an attachment (id=888) --> (https://bugs.maemo.org/attachment.cgi?id=888&action=view) basic_from_buffer.cc A small C++ example of the use of Gnome::Glade::Xml::create_from_buffer(), from libglademm. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 17:26:51 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 17:26:51 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080819142651.A00B9118A40@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 ------- Comment #2 from josh at freedesktop.org 2008-08-19 17:26 GMT+3 ------- Try running "dpkg -L rhapsody installer", or running dpkg -S on the rhapsody .desktop file. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 18:52:37 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 18:52:37 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080819155237.12F5FC131D@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #6 from cvmiller at gmail.com 2008-08-19 18:52 GMT+3 ------- Is there an update on this? Here is some more info. From dmesg, I see: [346319.132812] EAC mode: play disabled, rec disabled [346320.781250] input: Think Outside Keyboard as /class/input/input22 I see the kernel thread in ps: 2870 root SW< [khidpd_0a5c2001] In /sys/class/input, I see that the input directory has been created: lrwxrwxrwx 1 root root 0 Aug 19 11:46 event22 -> ../../class/input/input22/event22 The backlight will light when keys are pressed on the keyboard (iGo), but no charactors appear on the screen (xterm). If I disconnect the keyboard (using the BT icon) and then tap the xterm, the onscreen keyboard will pop up. Pressing a key on the BT keyboard will cause the onscreen keyboard to pop down (disappear), but still no characters show up in the xterm (from the BT keyboard). Rebooting fixes the problem until next time :( -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 19 23:49:07 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 19 Aug 2008 23:49:07 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080819204907.EE404118C83@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |moreinfo ------- Comment #3 from aklapper at openismus.com 2008-08-19 23:49 GMT+3 ------- I cannot reproduce this here, running 4.2008.30-2. /usr/share/applications/hildon/rhapsody.desktop does NOT exist in a fresh Diablo. Uninstalling Rhapsody (the Metapackage) 3.3.14 will also definitely remove this .desktop file, tested it twice here on Diablo with updates installed. Running dpkg -S /usr/share/applications/hildon/rhapsody.desktop says: rhapsody-player: /usr/share/applications/hildon/rhapsody.desktop -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 20 01:26:46 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 20 Aug 2008 01:26:46 +0300 (EEST) Subject: [hafqa] [Bug 2770] /dev/urandom produces predictable data just after boot In-Reply-To: Message-ID: <20080819222646.C0E24118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2770 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED Target Milestone|Fremantle |4.1+ ------- Comment #15 from aklapper at openismus.com 2008-08-20 01:26 GMT+3 ------- This has been fixed internally in initfs-diablo. The fix will soon be available in a public update for Diablo. Quoting: "It appears that we have a kernel bug in drivers/char/random.c. In the meantime, the driver has been somewhat modified and cleaned-up in mainline; mainline version does not have the bug. The kernel bug causes seeding data written to /dev/random or /dev/urandom to *not* affect the produced random numbers in any way." -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2770 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 20 04:10:43 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 20 Aug 2008 04:10:43 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080820011043.49537118A7E@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #13 from Jianjun.Yu at plenware.com 2008-08-20 04:10 GMT+3 ------- (In reply to comment #12) > Created an attachment (id=888) --> (https://bugs.maemo.org/attachment.cgi?id=888&action=view) [details] > basic_from_buffer.cc > > A small C++ example of the use of Gnome::Glade::Xml::create_from_buffer(), from > libglademm. > I get it. Thanks very much! -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 20 07:45:40 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 20 Aug 2008 07:45:40 +0300 (EEST) Subject: [hafqa] [Bug 2401] libdbus will assert/abort() internally In-Reply-To: Message-ID: <20080820044540.B8BB3118ECF@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2401 czr at iki.fi changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |CLOSED -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2401 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 21 15:34:32 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 21 Aug 2008 15:34:32 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080821123432.8F96C118A8B@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #7 from cvmiller at gmail.com 2008-08-21 15:34 GMT+3 ------- Some additional info on this problem: Reproduced problem reliably by spending 3 minutes, pressing a key on the keyboard, observing the BT icon turning blue, and then tapping on the icon and disconnecting. Repeated 16 times. Simultaneously, I had a ssh session from my laptop to the N800. By typing the command: ls /sys/class/input, I could watch the input## count up. When the BT keyboard reached input20, the keyboard would not type. Used a different iGo keyboard (my son's) and paired the keyboard with the N800 (the 4 digits used in pairing were accepted). Attempted to type in an xterm, no characters were displayed. /sys/class/input/ was up to input22. Comment: I am frustrated that no one at Nokia will take the 3 minutes it requires to reproduce this problem. Diablo is not worth this frustration, and I am going back to OS2007, where the problem does not exist. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 21 21:10:12 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 21 Aug 2008 21:10:12 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080821181012.AA4A21187B9@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 ------- Comment #4 from josh at freedesktop.org 2008-08-21 21:10 GMT+3 ------- (In reply to comment #3) > I cannot reproduce this here, running 4.2008.30-2. > /usr/share/applications/hildon/rhapsody.desktop Not referring to the desktop file for rhapsody itself; I mean the rhapsody-installer desktop file. > does NOT exist in a fresh Diablo. > Uninstalling Rhapsody (the Metapackage) 3.3.14 will also definitely remove this > .desktop file, tested it twice here on Diablo with updates installed. > Running > dpkg -S /usr/share/applications/hildon/rhapsody.desktop > says: > rhapsody-player: /usr/share/applications/hildon/rhapsody.desktop Again, not talking about rhapsody itself; I mean rhapsody-installer, the package which simply provides a menu entry to install rhapsody. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 21 23:03:14 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 21 Aug 2008 23:03:14 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080821200314.3581E118A5F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 ------- Comment #5 from aklapper at openismus.com 2008-08-21 23:03 GMT+3 ------- OK, then please tell me the exact, absolute, full path of the file. "rhapsody .desktop" is not really a file name... ;-) I probably won't be able to check this myself as this is a European device (Rhapsody is a US-only service). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 21 23:43:30 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 21 Aug 2008 23:43:30 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080821204332.0A3E81187B9@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 ------- Comment #6 from rabelg5 at gmail.com 2008-08-21 23:43 GMT+3 ------- (In reply to comment #5) > OK, then please tell me the exact, absolute, full path of the file. "rhapsody > .desktop" is not really a file name... ;-) > I probably won't be able to check this myself as this is a European device > (Rhapsody is a US-only service). > /usr/share/applications/hildon/rhapsody.desktop ~ $ apt-cache show rhapsody-installer Package: rhapsody-installer Status: install ok installed Priority: optional Section: libs Installed-Size: 316 Maintainer: Sotiris Makrygiannis Architecture: armel Version: 0.16 Depends: libatk1.0-0 (>= 1.12.2), libc6 (>= 2.5.0-1), libcairo2 (>= 1.4.10), libdbus-1-3 (>= 0.94), libdbus-glib-1-2 (>= 0.74), libdsme0, libgconf2-6 (>= 2.13.5), libglib2.0-0 (>= 2.12.12-1osso10), libgtk2.0-0 (>= 2:2.10.12-0osso15), libhildon1 (>= 1.0.11), libhildonmime0 (>= 2.0.2), libosso-gnomevfs2-0, libosso1 (>= 2.16), libpango1.0-0 (>= 1.16.4) Conffiles: /etc/rhapsody-install/rhapsody.install 16e83f92c3620e0b160fcfea50f978c1 /etc/rhapsody-install/rhapsody.desktop 4e65ac1b9032f0c2d651ced977fbadff Description: Installer utility application for Rhapsody (U.S only). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 22 10:51:37 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 22 Aug 2008 10:51:37 +0300 (EEST) Subject: [hafqa] [Bug 3418] DSP kernel crashes with bus error if dsp task doesn't answer poll In-Reply-To: Message-ID: <20080822075137.7E34811A947@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3418 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eero.tamminen at nokia.com -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3418 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 22 23:25:53 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 22 Aug 2008 23:25:53 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080822202553.446AA11AABA@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #8 from sjgadsby at ptdprolog.net 2008-08-22 23:25 GMT+3 ------- (In reply to comment #7) > Comment: I am frustrated that no one at Nokia will take the 3 minutes it > requires to reproduce this problem. I'm not at Nokia, but I did try to reproduce this bug with my ThinkOutside XTBT01 keyboard. I was unsuccessful. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 22 23:49:40 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 22 Aug 2008 23:49:40 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080822204940.92B2A118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #9 from aklapper at openismus.com 2008-08-22 23:49 GMT+3 ------- If it was that easy... There's also people out there for who the igo keyboard connects, e.g. http://www.internettablettalk.com/forums/showpost.php?p=203945&postcount=3 . So the assumption that nobody tried is wrong - sometimes it's just hard to reproduce. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Sat Aug 23 03:57:43 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Sat, 23 Aug 2008 03:57:43 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080823005743.7D52A118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 ------- Comment #10 from cvmiller at gmail.com 2008-08-23 03:57 GMT+3 ------- (In reply to comment #8) > (In reply to comment #7) > > Comment: I am frustrated that no one at Nokia will take the 3 minutes it > > requires to reproduce this problem. > > I'm not at Nokia, but I did try to reproduce this bug with my ThinkOutside > XTBT01 keyboard. I was unsuccessful. > Thanks for trying Steven, I am curious, when you tried to reproduce the problem what was the number up to on /sys/class/input/input## (where## is a number)? I could reproduce the problem reliably when that number was 20 or above. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 10:33:55 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 10:33:55 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825073355.E4F0E118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #14 from Jianjun.Yu at plenware.com 2008-08-25 10:33 GMT+3 ------- I think this bug could be closed! I build libglade2.4.0 from maemo and then build libglademm2.6.6 .there will be a problem about version. if I build libglade2.6.3 and then build libglademm2.6.6.There is no problem. I use the basic_from_buffer.cc to test the library.And it's correct. So I hope the reporter to close this bug. libglade could be download from http://ftp.gnome.org/pub/GNOME/sources/libglade/2.6/ libglademm could be download from http://ftp.gnome.org/pub/GNOME/sources/libglademm/2.6/ -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 10:48:38 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 10:48:38 +0300 (EEST) Subject: [hafqa] [Bug 795] Const build problems In-Reply-To: Message-ID: <20080825074838.71DA2118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=795 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|Next |3.0 ------- Comment #12 from aklapper at openismus.com 2008-08-25 10:48 GMT+3 ------- (Removing wrong/deprecated milestone.) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=795 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 11:29:57 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 11:29:57 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825082958.02078118402@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #15 from armin at arbur.net 2008-08-25 11:29 GMT+3 ------- Maybe I am missing something, but after doing "apt-get update" in scratchbox, then the libglade available is still 2.4, for both x86 and armel targets. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 12:32:57 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 12:32:57 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825093257.E7B64118402@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #16 from murrayc at murrayc.com 2008-08-25 12:32 GMT+3 ------- (In reply to comment #14) > I think this bug could be closed! > I build libglade2.4.0 from maemo and then build libglademm2.6.6 .there will be > a problem about version. What do you mean? Please be more clear. This is becoming very frustrating. For instance, please describe one problem that increasing the libglade version could cause? If necessary, please hand this bug over to somebody else. > if I build libglade2.6.3 and then build libglademm2.6.6.There is no problem. > I use the basic_from_buffer.cc to test the library.And it's correct. > > So I hope the reporter to close this bug. > > libglade could be download from > http://ftp.gnome.org/pub/GNOME/sources/libglade/2.6/ > > libglademm could be download from > http://ftp.gnome.org/pub/GNOME/sources/libglademm/2.6/ This bug is about increasing the libglade version in maemo, not about whether someone can build if from source locally. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 12:39:20 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 12:39:20 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080825093920.E299111A947@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 eero.tamminen at nokia.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eero.tamminen at nokia.com, | |kimmo.hamalainen at nokia.com Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 Keywords|moreinfo | ------- Comment #7 from eero.tamminen at nokia.com 2008-08-25 12:39 GMT+3 ------- Uh, I looked what the rhapsody installer actually does. It has /var/lib/dpkg/info/rhapsody-installer.postinst script that adds couple of things to sudoes file and then it has /usr/bin/rhapsody-installer.sh script that under sudo moves the rhapsody.desktop file to where desktop files are if that doesn't already exist and "region" returns "yes" (badly named binary, it tells whether it's US device). It doesn't remove the sudoers lines in postrm. /etc/osso-af-init/real-af-startup script seems then to run the rhapsody-installer.sh script on first bootup. This seems Byzantine. Not showing the rhapsody installer might have been done just by installing the .desktop file and removing it on first boot if the region user selected isn't right. Or if the installer could be installed afterwards, checking in postinst whether the region is right and failing postinst if it isn't. real-af-startup could also use something like what init does ("for script in /etc/first-bootup/*.sh...") for the first bootup stuff so that it's independent from other packages. I guess currently the actual rhapsody package overwrites the rhapsody.desktop file that the installer copied for itself. Better would be if rhapsody package would just conflict/replace the installer so that it (along with its own .desktop file) would get uninstalled. Are there any issues that current .desktop file would cause or could this be marked as an enhancement? (If there're issues, I think it would be better to create a new proper bug report with above details and description of the issue(s) it causes + invalidate this bug.) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 12:44:29 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 12:44:29 +0300 (EEST) Subject: [hafqa] [Bug 3635] New: open source alarm framework Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3635 Summary: open source alarm framework Product: System software Version: unspecified Platform: All OS/Version: Linux Status: NEW Severity: enhancement Priority: Medium Component: general AssignedTo: nobody at maemo.org ReportedBy: florian.boor at kernelconcepts.de QAContact: hafqa at maemo.org It would be great to have an open source implementation of the alarm framework. The main reason for this is portability: It would enable people wo want to use the HAF on other devices than the Nokia tablets to make use of this framework too. The same applies for applications that run both in Maemo and in other GUI environments. For these applictions it would be very useful to use the same API for alarms. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3635 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 13:44:20 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 13:44:20 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825104420.4153F118EC1@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #17 from aklapper at openismus.com 2008-08-25 13:44 GMT+3 ------- Just as a quick update: The internal bug is closed as WONTFIX for Diablo, and I have to discuss with Rodrigo first to be allowed to target it for Fremantle again. Yes, Nokia policies... :-( -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 13:52:10 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 13:52:10 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825105210.2710B118402@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #18 from murrayc at murrayc.com 2008-08-25 13:52 GMT+3 ------- (In reply to comment #17) > Just as a quick update: The internal bug is closed as WONTFIX for Diablo, and I > have to discuss with Rodrigo first to be allowed to target it for Fremantle > again. Yes, Nokia policies... :-( Fair enough. I guess they just don't like updating anything other than a micro version, though I'd like to know what the actual reasoning is in that internal bug. And he internal bug number should be in the whiteboard, or somewhere, I guess. Thanks. Let's keep this open for Fremantle, so we can fix this then. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 13:56:15 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 13:56:15 +0300 (EEST) Subject: [hafqa] [Bug 3635] open source alarm framework In-Reply-To: Message-ID: <20080825105615.72387118E9F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3635 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com, | |quim.gil at nokia.com ------- Comment #1 from aklapper at openismus.com 2008-08-25 13:56 GMT+3 ------- Can you define "alarm" a bit better and describe some usecases? It makes it easier to convince people... -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3635 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 14:01:38 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 14:01:38 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080825110138.2C23E118E9F@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #19 from aklapper at openismus.com 2008-08-25 14:01 GMT+3 ------- (In reply to comment #18) > And he internal bug number should be in the whiteboard it is already in the alias. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 14:31:05 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 14:31:05 +0300 (EEST) Subject: [hafqa] [Bug 3635] open source alarm framework In-Reply-To: Message-ID: <20080825113105.6BCBBC90F5@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3635 ------- Comment #2 from florian.boor at kernelconcepts.de 2008-08-25 14:31 GMT+3 ------- I see, the name is not consistent in the documentation. I'm not sure if other components are affected, but the alarm framework consists of libalarm and alarmd at least. http://maemo.org/development/documentation/how-tos/4-0-x/using_alarm_interface.html http://maemo.org/api_refs/4.0/alarm-api/index.html -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3635 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 18:17:21 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 18:17:21 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080825151721.2772BC90FA@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |moreinfo -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 18:39:11 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 18:39:11 +0300 (EEST) Subject: [hafqa] [Bug 3532] Bluetooth Keyboard input not accepted after connect: Can't Type In-Reply-To: Message-ID: <20080825153911.E6F18C90F7@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3532 sjgadsby at ptdprolog.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sjgadsby at ptdprolog.net Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 ------- Comment #11 from sjgadsby at ptdprolog.net 2008-08-25 18:39 GMT+3 ------- (In reply to comment #10) > I am curious, when you tried to reproduce the problem what was the number up to > on /sys/class/input/input## (where## is a number)? > > I could reproduce the problem reliably when that number was 20 or above. I must have stopped just short of that magic number last time, as I'm now finding that my 4.2008.30-2 N800 does begin ignoring input from my iGo/ThinkOutside Bluetooth keyboard as soon as /sys/class/input/input## hits 20. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3532 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Mon Aug 25 19:17:22 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Mon, 25 Aug 2008 19:17:22 +0300 (EEST) Subject: [hafqa] [Bug 2901] Can't install blues-utils-tools on current n810. In-Reply-To: Message-ID: <20080825161722.25BDDC90F4@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2901 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|Next |4.0+ ------- Comment #9 from aklapper at openismus.com 2008-08-25 19:17 GMT+3 ------- (Removing deprecated target milestone) -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2901 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 01:10:01 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 01:10:01 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080825221001.C8F87C90F5@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 ------- Comment #8 from josh at freedesktop.org 2008-08-26 01:10 GMT+3 ------- (In reply to comment #7) > Uh, I looked what the rhapsody installer actually does. [snip clear explanation of how the .desktop file ends up where it does without a package owning it] That certainly seems consistent with what I saw. > Are there any issues that current .desktop file would cause or could this > be marked as an enhancement? (If there're issues, I think it would be > better to create a new proper bug report with above details and description > of the issue(s) it causes + invalidate this bug.) 1) Removing rhapsody-installer does not remove the .desktop file. I had to manually remove it. 2) Other installer packages (gizmo-installer and skype-installer) work as expected, and own their own .desktop file. 3) Because the package system does not know about the .desktop file, it can't tell me which package relates to it (via dpkg -S, for instance). -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 01:11:23 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 01:11:23 +0300 (EEST) Subject: [hafqa] [Bug 3601] rhapsody-installer does not own its .desktop file In-Reply-To: Message-ID: <20080825221123.366FBC90F6@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3601 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords|moreinfo | -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3601 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 01:26:51 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 01:26:51 +0300 (EEST) Subject: [hafqa] [Bug 2723] Pushing key once causes multiple repeats In-Reply-To: Message-ID: <20080825222651.C9D79C90F7@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2723 ------- Comment #12 from desdemonaryan at hotmail.com 2008-08-26 01:26 GMT+3 ------- I noticed this problem immediately after upgrading my N800 from OS2007 to diablo. I'm adding my observations below, in the hope that they might help get a speedy resolution to this bug. I have a application which displays some data in a gtktreeview. Typically, I navigate the tree view pressing the down key. Sometimes when I do this, multiple key presses seem to be triggered and I get taken to the bottom of the treeview. The only way I can stop this happening is to quickly press the up button. Note that this problem is not restricted to the down button or my application. I can reproduce the same problem with the up button and I have also noticed that if I switch applications, e.g., to FBReader, while the key repeat problem is occurring, the problem persists in the new application. This problem did not occur on OS2007. Any idea when it might be fixed? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2723 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 05:01:43 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 05:01:43 +0300 (EEST) Subject: [hafqa] [Bug 2058] hildon-thumbnail has no autogen.sh In-Reply-To: Message-ID: <20080826020143.742F8D965D@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=2058 ------- Comment #1 from Fangjun.Peng at plenware.com 2008-08-26 05:01 GMT+3 ------- Created an attachment (id=905) --> (https://bugs.maemo.org/attachment.cgi?id=905&action=view) autogen.sh -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=2058 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 09:13:36 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 09:13:36 +0300 (EEST) Subject: [hafqa] [Bug 3032] missing diff utility (required by the GNU Coding Standards) In-Reply-To: Message-ID: <20080826061336.7FDC3C135C@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3032 ------- Comment #1 from haibo.li at plenware.com 2008-08-26 09:13 GMT+3 ------- You can upgrade the busybox to the latest version(1.11.1).Then you can use diff script. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3032 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Tue Aug 26 12:25:31 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Tue, 26 Aug 2008 12:25:31 +0300 (EEST) Subject: [hafqa] [Bug 3032] missing diff utility (required by the GNU Coding Standards) In-Reply-To: Message-ID: <20080826092531.8A5CE11AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3032 ------- Comment #2 from vincent-maemo at vinc17.org 2008-08-26 12:25 GMT+3 ------- But this isn't the latest official version (from Nokia's repositories) for OS2008. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3032 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 27 04:44:41 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 27 Aug 2008 04:44:41 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080827014441.2D1CE11AABB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #20 from Jianjun.Yu at plenware.com 2008-08-27 04:44 GMT+3 ------- (In reply to comment #16) > (In reply to comment #14) > > I think this bug could be closed! > > I build libglade2.4.0 from maemo and then build libglademm2.6.6 .there will be > > a problem about version. > > What do you mean? Please be more clear. This is becoming very frustrating. > > For instance, please describe one problem that increasing the libglade version > could cause? > > If necessary, please hand this bug over to somebody else. > > > if I build libglade2.6.3 and then build libglademm2.6.6.There is no problem. > > I use the basic_from_buffer.cc to test the library.And it's correct. > > > > So I hope the reporter to close this bug. > > > > libglade could be download from > > http://ftp.gnome.org/pub/GNOME/sources/libglade/2.6/ > > > > libglademm could be download from > > http://ftp.gnome.org/pub/GNOME/sources/libglademm/2.6/ > > This bug is about increasing the libglade version in maemo, not about whether > someone can build if from source locally. > [sbox-DIABLO_ARMEL: ~/bug3400] > apt-get install libglade2-0 [sbox-DIABLO_ARMEL: ~/bug3400/libglademm-2.6.6] > dpkg -l libglade2-0 Name Version Description +++-===================-===================-====================================================== ii libglade2-0 2.4.0-1osso2 Library to load .glade files at runtime [sbox-DIABLO_ARMEL: ~/bug3400] > wget http://ftp.gnome.org/pub/GNOME/sources/libglademm/2.6/libglademm-2.6.6.tar.gz [sbox-DIABLO_ARMEL: ~/bug3400] > tar -zxf ./libglademm-2.6.6.tar.gz [sbox-DIABLO_ARMEL: ~/bug3400] > cd libglademm-2.6.6 [sbox-DIABLO_ARMEL: ~/bug3400] > ./configure checking for LIBGLADEMM... configure: error: Package requirements (gtkmm-2.4 >= 2.6.0 libglade-2.0 >= 2.6.1) were not met: Requested 'libglade-2.0 >= 2.6.1' but version of Libglade is 2.4.0 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Wed Aug 27 11:18:42 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Wed, 27 Aug 2008 11:18:42 +0300 (EEST) Subject: [hafqa] [Bug 3400] Update libglade to at least 2.6.1 In-Reply-To: Message-ID: <20080827081842.89A2CC135C@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3400 ------- Comment #21 from murrayc at murrayc.com 2008-08-27 11:18 GMT+3 ------- (In reply to comment #20) > [sbox-DIABLO_ARMEL: ~/bug3400] > cd libglademm-2.6.6 > [sbox-DIABLO_ARMEL: ~/bug3400] > ./configure > checking for LIBGLADEMM... configure: error: Package requirements (gtkmm-2.4 >= > 2.6.0 libglade-2.0 >= 2.6.1) were not met: > Requested 'libglade-2.0 >= 2.6.1' but version of Libglade is 2.4.0 Yes, that is the entire point. Please, just assign this bug to somebody else. You are clearly totally confused. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3400 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Thu Aug 28 14:50:13 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Thu, 28 Aug 2008 14:50:13 +0300 (EEST) Subject: [hafqa] [Bug 3646] New: hildon-fm doesn't build with Gtk+ 2.13 Message-ID: https://bugs.maemo.org/show_bug.cgi?id=3646 Summary: hildon-fm doesn't build with Gtk+ 2.13 Product: System software Version: 4.1.1 Platform: All OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: Low Component: hildon-libs AssignedTo: nobody at maemo.org ReportedBy: lool at dooz.org QAContact: hildon-libs-bugs at maemo.org Hey, hildon-fm doesn't build against the new gtkfilesystem.h/gtkfilechooser.h implementation in 2.13. I wasn't sure whether to report this, so I mailed maemo-dev to check and someone suggested I do. I hesitated because: - it's still unsupported API/ABI, so it might break again - maemo seems to be moving to Qt, not sure Gtk+ 2.13 will ever happen in maemo Cheers, -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3646 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 29 01:47:55 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 29 Aug 2008 01:47:55 +0300 (EEST) Subject: [hafqa] [Bug 3646] hildon-fm doesn't build with Gtk+ 2.13 In-Reply-To: Message-ID: <20080828224755.689541182A3@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3646 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aklapper at openismus.com ------- Comment #1 from aklapper at openismus.com 2008-08-29 01:47 GMT+3 ------- what's the build error output? -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3646 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 29 02:54:13 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 29 Aug 2008 02:54:13 +0300 (EEST) Subject: [hafqa] [Bug 934] Stopping the UI environment does not work In-Reply-To: Message-ID: <20080828235413.4B87F118C83@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=934 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|4.0 |--- -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=934 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 29 12:05:25 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 29 Aug 2008 12:05:25 +0300 (EEST) Subject: [hafqa] [Bug 3646] hildon-fm doesn't build with Gtk+ 2.13 In-Reply-To: Message-ID: <20080829090525.A0093C90FB@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3646 ------- Comment #2 from lool at dooz.org 2008-08-29 12:05 GMT+3 ------- Oh the build errors are really aplenty; I've summarized some of the APIs which were renamed or replaced on the modest list: """ Just for the record, some of the API changes: GtkFilePath, GTK_TYPE_FILE_PATH, gtk_file_path_* => GFile, G_TYPE_FILE, g_file_* GtkFileSystemHandle => ~ GCancellable GtkFileInfoType => quite hard to map as it expresses GFileInfoType and GFileAttributeType infos at the same time GtkFileInfo => ~ closest to GFileInfo GtkFileFolder, gtk_file_folder_* => GtkFolder, gtk_folder_* gtk_file_system_path_is_local => didn't find an is_local test; it seems you have to test for nfs, smb etc. prefixes :-( gtk_file_paths_free, gtk_file_paths_copy, gtk_file_path_compare, gtk_file_paths_copy etc. => needs new implementations; Gtk+ doesn't provide gslists or comparison utilities like the previous ones etc. etc. """ -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3646 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 29 14:09:24 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 29 Aug 2008 14:09:24 +0300 (EEST) Subject: [hafqa] [Bug 3646] hildon-fm doesn't build with Gtk+ 2.13 In-Reply-To: Message-ID: <20080829110924.5E67FC90F7@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3646 aklapper at openismus.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3646 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. From bugzilla-daemon at maemo.org Fri Aug 29 14:13:55 2008 From: bugzilla-daemon at maemo.org (bugzilla-daemon at maemo.org) Date: Fri, 29 Aug 2008 14:13:55 +0300 (EEST) Subject: [hafqa] [Bug 3407] Input language switching does not work in browser entry fields In-Reply-To: Message-ID: <20080829111355.2B2F4C90F8@maemo.org> https://bugs.maemo.org/show_bug.cgi?id=3407 ------- Comment #11 from aklapper at openismus.com 2008-08-29 14:13 GMT+3 ------- Fixed in package hildon-input-method-plugins 3.8.39-1 which is part of the internal build version 4.2008.32 Any public update released with or after this build version will include the fix. Please verify that the new version fixes the bug by marking this bug report as VERIFIED after the public update has been released and if you have some time. -- Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email Replies to this email are NOT read, instead please add comments at https://bugs.maemo.org/show_bug.cgi?id=3407 ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact.