[hafqa] [hafqa] [Bug 3146] miniSD insertion lockup

[From: bugzilla-daemon at maemo.org]

https://bugs.maemo.org/show_bug.cgi?id=3146





------- Comment #6 from pg at cultureconsult.ca  2008-06-21 19:06 GMT+3 -------
The bug seems to be gone - I can no longer reproduce the locking problem. In
the past month I have updated to OS2008 2.2007.51-3; perhaps that changed
something?

The following tests, as requested:
Disk was verified on Mac OSX 10.4, Disk Utility, as follows:
Verifying volume “PGMSD2G”
** /dev/disk2s1
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
386 files, 736512 free (23016 clusters)
Mounting Disk
1 non HFS volume checked
        Volume passed verification

Disk info as follows:
Name :  Nokia N810 Media
        Type :  Disk
        Disk Identifier :       disk2
        Media Name :    Nokia N810 Media
        Media Type :    Generic
        Connection Bus :        USB
        Connection Type :       External
        USB Serial Number :     3238204E6F76
        Partition Type :        FDisk_partition_scheme
        Writable :      Yes
        Ejectable :     Yes
        Mac OS 9 Drivers Installed :    No
        Location :      External
        Total Capacity :        1.9 GB (2,032,664,576 Bytes)
        S.M.A.R.T. Status :     Not Supported
        Disk Number :   2
        Partition Number :      0

Transfered file image to Mac (using Disk Utility -> New Image)
Formatted card using N810 File Manager
Card mounts normally, no locking problem
Re-scanned card using Disk Utility:
Verifying volume “disk2s1”
** /dev/disk2s1
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
Next free cluster in FSInfo block (2) not free
fix? no
3 files, 1981120 free (495280 clusters)
Mounting Disk
1 non HFS volume checked
        Volume passed verification

COULD NOT TRANSFER IMAGE BACK WITH DISK UTILITY -> RESTORE
(this is probably operator error on my part)
Copied files back manually
Files appear to work normally

Hope that helps.


-- 
Configure bugmail: https://bugs.maemo.org/userprefs.cgi?tab=email
Replies to this email are NOT read, instead please add comments at
https://bugs.maemo.org/show_bug.cgi?id=3146
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.