[maemo-commits] [maemo-commits] r16391 - in projects/haf/trunk/hildon-thumbnail: . debian

Wed Oct 15 11:35:13 EEST 2008

Author: pvanhoof
Date: 2008-10-15 11:35:11 +0300 (Wed, 15 Oct 2008)
New Revision: 16391

Modified:
   projects/haf/trunk/hildon-thumbnail/INSTALL
   projects/haf/trunk/hildon-thumbnail/configure.ac
   projects/haf/trunk/hildon-thumbnail/debian/changelog
Log:
Releasing 3.0.4

Modified: projects/haf/trunk/hildon-thumbnail/INSTALL
===================================================================

--- projects/haf/trunk/hildon-thumbnail/INSTALL	2008-10-15 08:31:05 UTC (rev 16390)
+++ projects/haf/trunk/hildon-thumbnail/INSTALL	2008-10-15 08:35:11 UTC (rev 16391)
@@ -1,19 +1,13 @@
-Installation Instructions
-*************************
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
+   This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+   These are generic installation instructions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -26,9 +20,9 @@
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
+the results of its tests to speed up reconfiguring.  (Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.
+cache files.)
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -38,17 +32,20 @@
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
 
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -67,55 +64,54 @@
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  6. Often, you can also type `make uninstall' to remove the installed
-     files again.
-
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
 
 Installation Names
 ==================
 
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
+options like `--bindir=PATH' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -126,7 +122,7 @@
 Optional Features
 =================
 
-Some packages pay attention to `--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -141,11 +137,11 @@
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -160,7 +156,7 @@
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the `--target=TYPE' option to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -171,9 +167,9 @@
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -182,7 +178,7 @@
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -190,18 +186,14 @@
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+will cause the specified gcc to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'

Modified: projects/haf/trunk/hildon-thumbnail/configure.ac
===================================================================
--- projects/haf/trunk/hildon-thumbnail/configure.ac	2008-10-15 08:31:05 UTC (rev 16390)
+++ projects/haf/trunk/hildon-thumbnail/configure.ac	2008-10-15 08:35:11 UTC (rev 16391)
@@ -1,6 +1,6 @@
 AC_INIT(Makefile.am)
 AC_CONFIG_AUX_DIR(config)
-AM_INIT_AUTOMAKE(hildon-thumbnail, 3.0.3)
+AM_INIT_AUTOMAKE(hildon-thumbnail, 3.0.4)
 AM_CONFIG_HEADER(config.h)
 
 AC_PROG_CC

Modified: projects/haf/trunk/hildon-thumbnail/debian/changelog
===================================================================
--- projects/haf/trunk/hildon-thumbnail/debian/changelog	2008-10-15 08:31:05 UTC (rev 16390)
+++ projects/haf/trunk/hildon-thumbnail/debian/changelog	2008-10-15 08:35:11 UTC (rev 16391)
@@ -1,3 +1,9 @@
+hildon-thumbnail (3.0.4~unreleased) unstable; urgency=low
+
+  * Uses new MediaArtStorageSpec
+
+ -- Philip Van Hoof <pvanhoof at gnome.org>  Wed, 15 Oct 2008 10:27:00 +0200
+
 hildon-thumbnail (3.0.3~unreleased) unstable; urgency=low
 
   * Experimental package for testing Nokia Music Store and Google Images album


