[maemo-developers] [maemo-developers] Still problems with Linux flasher tool...

[From: Karoliina.T.Salminen at nokia.com]

Hello,

Here is a short step by step howto:
- Switch off the 770 device.
- Plug in the usb cable.
- Execute flasher.
$ flasher --enable-rd-mode
- Flasher starts waiting in the loop until you switch the device back
on.
- Switch on the 770 device.
- And you are done.

Best Regards,
Karoliina Salminen
http://www.karoliinasalminen.com/blog


>-----Original Message-----
>From: maemo-developers-bounces at maemo.org 
>[mailto:maemo-developers-bounces at maemo.org] On Behalf Of ext 
>Marco Wierer
>Sent: 17 November, 2005 23:28
>To: maemo-developers at maemo.org
>Subject: [maemo-developers] Still problems with Linux flasher tool...
>
>Hello,
>
>I'm trying to activate the r&d mode on my device using the 
>Linux flasher tool but the tool just waits in an endless loop 
>waiting for the device (Suitable USB device not found, 
>waiting). I already read all threads regarding this topic but 
>I don't have a clue what I'm doing wrong: I turn off the 
>device, start the flasher tool, attach the device and power on 
>the device but without success. I also removed the MMC - same 
>result. The device is simply booting and telling me that it's 
>attached to USB.
>The 770 is directly connected to the USB interface on my 
>computer (no hub) and I have firmware version 1.2005.42-9 
>installed on the device. I'm using SuSE 9.3 - any thoughts?
>
>Thnx,
>Marco
>
>
>
>_______________________________________________
>maemo-developers mailing list
>maemo-developers at maemo.org
>https://maemo.org/mailman/listinfo/maemo-developers
>