[maemo-developers] [maemo-developers] Still problems with Linux flasher tool...

[From: Marco Wierer]

Hello,
pressing the home key prevents booting my device but the flasher tool waits
in an endless loop and doesn't find the 770 device.
Are there any special requirements regarding the linux host environment?

Regards,
Marco

-----Ursprüngliche Nachricht-----
Von: maemo-developers-bounces at maemo.org
[mailto:maemo-developers-bounces at maemo.org] Im Auftrag von Roberto Resoli
Gesendet: Montag, 21. November 2005 15:32
An: maemo-developers at maemo.org
Betreff: Re: [maemo-developers] Still problems with Linux flasher tool...

2005/11/21, Karoliina.T.Salminen at nokia.com <Karoliina.T.Salminen at nokia.com>:
> Hello,
>
> Here is a short step by step howto:
> - Switch off the 770 device.
> - Plug in the usb cable.
> - Execute flasher.
> $ flasher --enable-rd-mode
> - Flasher starts waiting in the loop until you switch the device back
> on.
> - Switch on the 770 device.
> - And you are done


To my knowledge (please correct me if this is not true in all
conditions) there is no need to start the update BEFORE turning on the
device.
0) plug usb cable in
1) Press & hold the home key; turn on 770
2) 770 will not boot and wait indefinitely
3) start the flashing program

Tested with linux flasher. Windows flasher never worked for me.

Roberto Resoli

> Best Regards,
> Karoliina Salminen
> http://www.karoliinasalminen.com/blog
>
>
> >-----Original Message-----
> >From: maemo-developers-bounces at maemo.org
> >[mailto:maemo-developers-bounces at maemo.org] On Behalf Of ext
> >Marco Wierer
> >Sent: 17 November, 2005 23:28
> >To: maemo-developers at maemo.org
> >Subject: [maemo-developers] Still problems with Linux flasher tool...
> >
> >Hello,
> >
> >I'm trying to activate the r&d mode on my device using the
> >Linux flasher tool but the tool just waits in an endless loop
> >waiting for the device (Suitable USB device not found,
> >waiting). I already read all threads regarding this topic but
> >I don't have a clue what I'm doing wrong: I turn off the
> >device, start the flasher tool, attach the device and power on
> >the device but without success. I also removed the MMC - same
> >result. The device is simply booting and telling me that it's
> >attached to USB.
> >The 770 is directly connected to the USB interface on my
> >computer (no hub) and I have firmware version 1.2005.42-9
> >installed on the device. I'm using SuSE 9.3 - any thoughts?
> >
> >Thnx,
> >Marco
> >
> >
> >
> >_______________________________________________
> >maemo-developers mailing list
> >maemo-developers at maemo.org
> >https://maemo.org/mailman/listinfo/maemo-developers
> >
> _______________________________________________
> maemo-developers mailing list
> maemo-developers at maemo.org
> https://maemo.org/mailman/listinfo/maemo-developers
>
_______________________________________________
maemo-developers mailing list
maemo-developers at maemo.org
https://maemo.org/mailman/listinfo/maemo-developers