[maemo-developers] [maemo-developers] Network using PC BT Network Access Point
From: Ayoze Roberto Bernardo ayoze at linuxlover.orgDate: Wed Oct 26 23:52:44 EEST 2005
- Previous message: [maemo-developers] Network using PC BT Network Access Point
- Next message: [maemo-developers] Network using PC BT Network Access Point
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
I've done that, I'm thinking to write an article in the WIKI... Really that's not a big problem, but you need r00t access... well, look in the wiki in those days, I'll write it in a few days :) Cheers Ayoze El Miércoles 26 Octubre 2005 22:20, Ilkka Urtamo escribió: > Hello > > I have been trying to get net access via USB BT in my home PC. > (due 2 reasons, BT does not need so much power and I dont have WLAN atm ) > > First tries with DUN was unsuccessfull, for some reason device refuses to > see my DUN in the PC and complains that "phone does not have services". > > router PC> sdptool browse local > Service Name: Dial-Up Networking > Service RecHandle: 0x10002 > Service Class ID List: > "Dialup Networking" (0x1103) > "Generic Networking" (0x1201) > Protocol Descriptor List: > "L2CAP" (0x0100) > "RFCOMM" (0x0003) > Channel: 1 > Profile Descriptor List: > "Dialup Networking" (0x1103) > Version: 0x0100 > Weard.. huh? > > Anyway... So I started making NAP connection. > Set up pand to listen in PC side, gained root to dev, executed in it: > pand -c <PC bdaddr> --role NAP -z > ifconfig bnep0 192.168.2.2 netmask 255.255.255.0 > route add default gw 192.168.2.1 > (havent checked for dns yet...) > > After this I can ping the dev from the host side. dev dont have ping > command so i cannot test that direction but I would say it works also. > > Problem now is, that even i have bnap0 on ifconfig in the dev and > everything is fine (it even made small green gobe on top of the cellphone > icon in status bar) each app whants to have the connection made (starts > connection dialogs). > > My question is, how does the osso system (or dbus or what ever is > responcible) determines when net connection is available? > > Any toughts? > > PS. It seems normaly connections are made by btcond and I would modify > that but I cant find source code for btcond anywhere. > > > Greets, Ilkka > > _______________________________________________ > maemo-developers mailing list > maemo-developers at maemo.org > https://maemo.org/mailman/listinfo/maemo-developers
- Previous message: [maemo-developers] Network using PC BT Network Access Point
- Next message: [maemo-developers] Network using PC BT Network Access Point
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]