[maemo-developers] [maemo-developers] Error compiling kernel

From: Andrey Khurri andrey.khurri at hiit.fi
Date: Thu Apr 27 19:18:11 EEST 2006
Andrey Khurri wrote:

> Hi all,
>
> I made modifications to n770_defconfig according to Maemo HowTo: 
> http://maemo.org/maemowiki/HowTo_KernelCompilation
> Then after running "dpkg-buildpackage -rfakeroot -uc -us -sa -D" or 
> "dpkg-buildpackage -rfakeroot -uc -us -sa -d" (I tried both ways) I 
> get following error:
>
> --- a part of log including errors:
>
> * Library routines
> *
> CRC-CCITT functions (CRC_CCITT) [Y/?] y
> CRC32 functions (CRC32) [Y/?] y
> CRC32c (Castagnoli, et al) Cyclic Redundancy-Check (LIBCRC32C) 
> [N/m/y/?] n
> make[1]: Leaving directory 
> `/home/akhurri/build/su-18-kernel-2.6.12.3/kernel-source-2.6.12.3'
> make[1]: Entering directory 
> `/home/akhurri/build/su-18-kernel-2.6.12.3/kernel-source-2.6.12.3'
>  CHK     include/linux/version.h
>  SPLIT   include/linux/autoconf.h -> include/config/*
>  SYMLINK include/asm-arm/arch -> include/asm-arm/arch-rpc
>  CC      arch/arm/kernel/asm-offsets.s
> In file included from include/asm/page.h:27,
>                 from include/asm/cpu-single.h:33,
>                 from include/asm/proc-fns.h:154,
>                 from include/asm/system.h:94,
>                 from include/asm/bitops.h:22,
>                 from include/linux/bitops.h:77,
>                 from include/linux/thread_info.h:20,
>                 from include/linux/spinlock.h:12,
>                 from include/linux/capability.h:45,
>                 from include/linux/sched.h:7,
>                 from arch/arm/kernel/asm-offsets.c:13:
> include/asm/glue.h:111:2: #error Unknown data abort handler type
> In file included from include/asm/cpu-single.h:33,
>                 from include/asm/proc-fns.h:154,
>                 from include/asm/system.h:94,
>                 from include/asm/bitops.h:22,
>                 from include/linux/bitops.h:77,
>                 from include/linux/thread_info.h:20,
>                 from include/linux/spinlock.h:12,
>                 from include/linux/capability.h:45,
>                 from include/linux/sched.h:7,
>                 from arch/arm/kernel/asm-offsets.c:13:
> include/asm/page.h:92:2: #error Unknown user operations model
> make[2]: *** [arch/arm/kernel/asm-offsets.s] Error 1
> make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 2
> make[1]: Leaving directory 
> `/home/akhurri/build/su-18-kernel-2.6.12.3/kernel-source-2.6.12.3'
> make: *** [build-stamp] Error 2
>
> --- end of log
>
> I did modifications to debian/rules exactly how HowTo suggests it, 
> that is I commented 2 lines out.
> I have looked trough mailing list archive but I didn't find any 
> similar to mine bugs.
>
> By the way, what would be the right/perfect way of modifying 
> n770_defconfig file?
> I did it as follows: copied to a kernel source tree on my host PC, ran 
> "make menuconfig" there, made modifications I need, replaced old 
> config with new one in arch/arm/configs (of course, with the same name 
> "n770_defconfig").
> I also tried to run "make n770_defconfig" inside 
> ../build/su-18-kernel-2.6.12.3/kernel-source-2.6.12.3 . However, it 
> doesn't seem to be working properly. It just goes trough the config 
> file and outputs its content up to a point but it doesn't proceed with 
> usual graphical interface where you choose options.
>
> I am wondering if someone has experienced the same. I would appreciate 
> any help or comments.
> Thanks in advance.
>
> Andrey
>
>
Hi there,

Just in case someone is thinking about my problem described above. I 
have fixed it. That was definetlu my fault.
Of course I must have been doing "make menuconfig" inside my Scratchbox 
ARM target within kernel-source-tree but not somewhere else on my i386. 
So the right way is to make any modifications to n770_defconfig inside 
Scratchbox.
Then "dpkg-buildpackage -rfakeroot -uc -us -sa -D" works fine and I get 
new zImage for my Tablet.

Sorry if I wasted someone's time.

BR,
Andrey

-- 
Andrey Khurri, Researcher
Helsinki Institute for Information Technology (HIIT)
Tel: +358 50 384 1510
Fax: +358  9 694 9768
andrey.khurri at hiit.fi


More information about the maemo-developers mailing list