[maemo-developers] [maemo-developers] compiling kernel Re: Fwd: [maemo-users] howtouse the 770 as wlan-card replacement?

[From: Delitsyn Igor]

Hi Pete,

I don´t really want to use the scratchbox environment to compile the kernel. 
Ed and Clemens say that it is possible to use standard procedures and still 
get the kernel compiled correctly. If anybody has such an experience, I would 
really appreciate to get a feedback.

Best regards,
Igor

On Friday 13 January 2006 12:35, you wrote:
> Hi,
>
> check out the kernel compilation how-to that was added to maemowiki
> yesterday [1]. Regarding the problem you're having, it strongly sounds like
> your initfs is not in sync with your kernel image. Please note that the
> instructions assume you are using the 1.1 final release (published
> yesterdat) and have 3.2005.51-13 installed on your device, as these two are
> compatible.
>
> Regards,
>
> - Pete -
>
>
> [1] http://www.maemo.org/maemowiki/HowTo_KernelCompilation
>
>
> -----Original Message-----
> From: maemo-developers-bounces at maemo.org
> [mailto:maemo-developers-bounces at maemo.org] On Behalf Of Delitsyn Igor
> Sent: 13. tammikuuta 2006 12:45
> To: maemo-developers at maemo.org
> Subject: Re: [maemo-developers] compiling kernel Re: Fwd: [maemo-users]
> howtouse the 770 as wlan-card replacement?
>
> Hi,
>
> I´ve compiled the kernel exactly like Clemens said and I´ve also used ´make
> n770_defconfig´ like Ed proposed. Then I´ve used flasher to flash the
> kernel. The problem is, in both cases the kernel works, the system starts
> loading and just before the actual start it hangs and after a while the
> device restarts. If I flash the original kernel extracted from FIASCO image
> back to the device, it works just fine. Do you have any ideas on how to fix
> the problem?
>
> Best regards,
> Igor
>
> Ed Bartosh wrote:
> > On Wed, 2006-01-04 at 10:10, ext Frantisek Dufka wrote:
> >> Clemens Eisserer wrote:
> >> >  I   don't feel that comfortable with compiling my own kernel
> >> > with all the nokia patches for this exotic device ;)
> >>
> >> It is not so hard. N770 specific kernel sources are here
> >> http://repository.maemo.org/pool/maemo1.1rc6/free/k/kernel-source-2.6
> >> .12.3/
> >> original kernel config is here
> >> http://maemo.org/maemowiki/KernelConfig
> >>
> >> You just need to unpack/install it, copy kernel config to .config and
> >> do usual 'make oldconfig; make menuconfig; make'
> >
> > I'd suggest to just 'make n770_defconfig' instead of copy&paste config
> > from wiki.
> >
> > --
> > Best regards,
> > Ed
>
> _______________________________________________
> maemo-developers mailing list
> maemo-developers at maemo.org
> https://maemo.org/mailman/listinfo/maemo-developers