[maemo-developers] [maemo-developers] Re: high speed (52/48Mhz) MMC mode added
From: Larry Battraw lbattraw at gmail.comDate: Tue Nov 28 23:38:25 EET 2006
- Previous message: [maemo-developers] Re: high speed (52/48Mhz) MMC mode added
- Next message: [maemo-developers] Re: high speed (52/48Mhz) MMC mode added
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Actually, I noticed the same thing although I'll have to go back and make sure it wasn't all of the kernels that had problems with WEP. I was never able to get it working although WPA is fine. Larry On 11/28/06, Frantisek Dufka <dufkaf at seznam.cz> wrote: > Armin M. Warda wrote: > > I repeated the test three times, the result was always reproduced. > > > > regards, Armin. > > > > Huh, that's weird. wi-fi driver and 802.11 protocol is even not in > kernel but in extra module. The only changes in that kernel are: > 1 extended backlight control (patch on my site) > 2 high speed mmc patch (on my site) > 3 kernel has enabled crypto API (disabled in nokia build) for PPTP module > > Any dmesg errors while connecting? Are you running correct IT2006 > version for the kernel (i.e. not running older 1.2006 with disabled > lifeguard or watchdog by chance)? Are you booting otherwise same systems > (preferably from flash)? > > Works for me fine with WPA with Asus WL-500G deluxe. > Just also flashed that kernel and tried also ad-hoc WEP conection with > my notebook and it works too. > > I simply don't have any idea why it should affect wi-fi network at all > except when possibly using with older IT2006 from July (so the cx3110x > and umac modules cannot load) which normally causes reboot loop. > > Frantisek
- Previous message: [maemo-developers] Re: high speed (52/48Mhz) MMC mode added
- Next message: [maemo-developers] Re: high speed (52/48Mhz) MMC mode added
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]