[maemo-developers] N800 Power cycles

[From: Rainer Dorsch]

Henrik,

thanks for the quick reply.

Am Samstag, 6. Juni 2009 schrieben Sie:
> Rainer Dorsch kirjoitti 06.06.2009 21:02:
> > Weired, after waiting a few hours and booting the N800 w/o a power cable,
> > it booted again.
>
>     When a power cable is connected, the device seems to be running the
> operating system in the background. Thus, simply switching the power off
> does not reboot the device in that case. If you need to cold boot the
> device, the power cable must be disconnected (and sometimes a battery
> also ;).
>

Hmm....I was removing the battery several times (that was the only way to stop 
the power cycles). But when I inserted the battery again (sometimes after 
minutes) and plugged the power cable the N800 started immediately to boot.

I am wondering what I would have done if my battery would have been empty and 
I could not boot w/o power cable.

Thanks,
Rainer
-- 
Rainer Dorsch
Lärchenstr. 6
D-72135 Dettenhausen
07157-734133
email: rdorsch at web.de
jabber: rdorsch at jabber.org
GPG Fingerprint: 5966 C54C 2B3C 42CC 1F4F  8F59 E3A8 C538 7519 141E
Full GPG key: http://pgp.mit.edu/