[maemo-developers] Maemo 5 On Beagleboard (B5) boot fail.

[From: Qingbin]

Hi :

  I installed the Maemo-5 system on my Beagleboard(B5) flowed  the
url:http://omappedia.org/wiki/Maemo_Getting_Started.

But when the system running, something wrong. The X-server boot fail
and then the system reboot . Fail Message:


/etc/init.d/rcS: line 268: cannot create
/sys/class/bluetooth/hci0/idle_timeout: nonexistent directory
About to exec dsme in state 'USER'.
  syslogd: The file /etc/services does not seem exist.
  syslogd: network logging disabled (syslog/udp service unknown).
  syslogd: see syslogd(8) for details of whether and how to enable
it.: Operation not permitted
waitfordsme: Wait for DSME socket...
DSME 0.60.34 starting up
Error opening WD /dev/twl4030_wdt
/dev/twl4030_wdt: No such file or directory
BOOTSTATE: 'USER'
state change request: DSME_STATE_NOT_SET -> DSME_STATE_USER
Startup state: DSME_STATE_USER
waitfordsme: OK: DSME socket exists
USER

Maemo 5 qinbin-desktop ttyS2

qinbin-desktop login: Starting hal daemon
Starting SGX Driver
SGX 1
Starting ohmd
SGX 2
SGX 3
Starting csd[1197]  simpb
SGX 4
SGX 5
Successfully started SGX
Starting Xorg Server
Starting ohmd
(++) Log file: "/tmp/Xorg.0.log", Time: Sat Jan  1 00:00:11 2000
(==) Using config file: "/etc/X11/xorg.conf"
Starting ohmd
[   41.072418] NET: Registered protocol family 10
_X11TransSocketINETConnect() can't get address for localhost:6000:
Temporary failure in name resolution
[   49.476806] SR2: VDD autocomp is not active
[   49.481536] SR1: VDD autocomp is not active
/usr/bin/hildon-status-menu: console is quiet, define DEBUG_OUTPUT to
prevent this.

Backtrace:
0: /usr/bin/Xorg(xorg_backtrace+0x30) [0x89450]
1: /usr/bin/Xorg(xf86SigHandler+0x58) [0x4e528]
2: /lib/libc.so.6(__default_sa_restorer_v2+0) [0x403638c0]
3: /usr/lib/xorg/modules/extensions/libdri2.so(DRI2GetBuffers+0x7c) [0x404a4e38]
4: /usr/lib/xorg/modules/extensions/libdri2.so [0x404a5504]
5: /usr/bin/Xorg [0x80e74]
6: /usr/bin/Xorg(sin+0xfb0) [0x238f8]
7: /lib/libc.so.6(__libc_start_main+0x108) [0x4034c974]
8: /usr/bin/Xorg(pixman_transform_multiply+0x38) [0x22c50]

Fatal server error:
Caught signal 11.  Server aborting

Is there any suggestion ?


-- 
Best Regards & Thanks!
Qing-bin Guo