[maemo-developers] Maemo5 on Beagle

[From: Till Harbaum]

Hi,

i do get an image on the B7 hardware. There are still major issues. The
most significant is probably that the device tends to reset/reboot after
a few minutes of being idle. Also it then doesn't reboot but hangs in/after 
TIs X-loader and before uboot. 

For me currently a mystery is the source of the default video mode the device
comes up with: It definitely uses the panel driver in panel-generic. But this
only contains a single mode of 640x480 pixels. Yet the device comes up with
800x600 pixels. Where does this mode come from?

Till

----- original Nachricht --------

Betreff: Re: Maemo5 on Beagle
Gesendet: Do, 29. Okt 2009
Von: Juha Kallioinen<juha.kallioinen at nokia.com>

> ext Tuomas Kulve wrote:
> > Tuomas Kulve wrote:
> >> I work with C2 revision and I use Mini-A cable with powered USB hub. The
> >> Beagle is also powered directly. This setup was the only one I got
> >> working with the earlier B revisions and I've stick to it.
> > 
> > With C2 revision it looks like both the 16 and 24 bit modes work (at
> > least I got the desktop showing).
> > 
> > I tried also with B5 revision and although X log says everything is fine
> > I don't get any image on the LCD monitor. The monitor will shutdown
> > because of the "screensaver" as it should and it wakes up when I move
> > the mouse, but the screen is black all the time.
> 
> For me the screen wakes up when I move the mouse around. No image, though.
> 
> -- 
> Juha Kallioinen
> _______________________________________________
> maemo-developers mailing list
> maemo-developers at maemo.org
> https://lists.maemo.org/mailman/listinfo/maemo-developers
> 

--- original Nachricht Ende ----