<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18852">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV> </DIV>
<DIV><BR></DIV>
<DIV><FONT size=2 face=Arial>Hello,</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I Have a Nokia N800 with the actual OS2008 Diablo.
Kernel Version 2.6.21. Since 2.6.15 theres mppe-128 support i think and hope :-)
But this is not the Problem. I Turned Encryption off on my VPN Router for
testing.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>First my Configs :</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial><U>options:</U></FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>lock </FONT></DIV>
<DIV><FONT size=2 face=Arial>noauth </FONT></DIV>
<DIV><FONT size=2 face=Arial>refuse-chap </FONT></DIV>
<DIV><FONT size=2 face=Arial>refuse-mschap </FONT></DIV>
<DIV><FONT size=2 face=Arial>refuse-eap </FONT></DIV>
<DIV><FONT size=2 face=Arial>nobsdcomp </FONT></DIV>
<DIV><FONT size=2 face=Arial>nodeflate </FONT></DIV>
<DIV><FONT size=2 face=Arial>mtu 1416</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial><U>chap-secrets</U></FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>"christian" "pptp" "<password>"
*</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial><U>peer config file</U> :</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>pty "pptp <my.dyndns.adress>
--nolaunchpppd"<BR>name christian<BR>remotename PPTP<BR></FONT><FONT size=2
face=Arial>file /etc/ppp/options.pptp<BR>ipparam home</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>If i start my tunnel using this command : "pon home
debug dump logfd 2 nodetach" I always get an error "no auth is possible"
and my Bintec VPN Access 25 says "PAP/CHAP authentication failure"</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>This is the output of pppd :</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>/home/user # pon home debug dump logfd 2
nodetach<BR></FONT></DIV>
<DIV><FONT size=2 face=Arial>pppd options in effect:<BR>debug # (from command
line)<BR>nodetach # (from command line)<BR>logfd 2 # (from command line)<BR>dump
# (from command line)<BR>noauth # (from /etc/ppp/options.pptp)<BR>refuse-chap #
(from /etc/ppp/options.pptp)<BR>refuse-mschap # (from
/etc/ppp/options.pptp)<BR>refuse-eap # (from /etc/ppp/options.pptp)<BR>name
christian # (from /etc/ppp/peers/home)<BR>remotename PPTP # (from
/etc/ppp/peers/home)</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2 face=Arial>pty pptp <my.dyndns.adress> --nolaunchpppd #
(from /etc/ppp/peers/home)<BR>crtscts # (from /etc/ppp/options)<BR>asyncmap 0 #
(from /etc/ppp/options)<BR>mtu 1416 # (from
/etc/ppp/options.pptp)<BR>lcp-echo-failure 4 # (from
/etc/ppp/options)<BR>lcp-echo-interval 30 # (from
/etc/ppp/options)<BR>show-password # (from /etc/ppp/options)<BR>ipparam home #
(from /etc/ppp/peers/home)<BR>defaultroute # (from
/etc/ppp/options.pptp)<BR>proxyarp # (from /etc/ppp/options)<BR>nobsdcomp #
(from /etc/ppp/options.pptp)<BR>nodeflate # (from
/etc/ppp/options.pptp)<BR>noipx # (from /etc/ppp/options)<BR>using channel
15<BR>Using interface ppp1<BR>Connect: ppp1 <--> /dev/pts/2</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2 face=Arial>sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x3074537d> <pcomp> <accomp>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>rcvd [LCP ConfReq id=0x1 <mru 1524> <auth
chap MD5> <magic 0x11a1505c> <pcomp> <accomp>]
<--------------My Router requests MS-CHAP-V2 ?</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>No auth is possible</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>sent [LCP ConfRej id=0x1 <auth chap MD5>]
<---------------- My damn Tablet rejects MS-CHAP-V2 ?</FONT></DIV>
<DIV><FONT size=2 face=Arial>sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x3074537d> <pcomp> <accomp>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0x3074537d> <pcomp> <accomp>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>rcvd [LCP ConfReq id=0x2 <mru 1524> <auth
pap> <magic 0xf00c982c> <pcomp> <accomp>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>No auth is possible</FONT></DIV>
<DIV><FONT size=2 face=Arial>sent [LCP ConfRej id=0x2 <auth
pap>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0x3074537d> <pcomp> <accomp>]</FONT></DIV>
<DIV><FONT size=2 face=Arial>rcvd [LCP TermReq id=0x3]</FONT></DIV>
<DIV><FONT size=2 face=Arial>sent [LCP TermAck id=0x3]</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Modem hangup</FONT></DIV>
<DIV><FONT size=2 face=Arial>Connection terminated.</FONT></DIV>
<DIV><FONT size=2 face=Arial>Script pptp <my.dyndns.adress> --nolaunchpppd
finished (pid 2406), status = 0x0<BR></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Can anyone help me with this problem ? I'am now only interested in an
unencryptet pptp tunnel. The mppe thing comes later :-) I Tryed PAP,CHAP and
MS-CHAP, too.With the same result.(Of course i changed the "reject-strings" in
the options.pptp file)</DIV>
<DIV>I read the Howto and FAQ on the sourceforce site of the ppp
project,too.</DIV>
<DIV> </DIV>
<DIV>Greetings,</DIV>
<DIV> </DIV>
<DIV>chris<BR></DIV></FONT>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>maemo-developers
mailing
list<BR>maemo-developers@maemo.org<BR>https://lists.maemo.org/mailman/listinfo/maemo-developers<BR></BODY></HTML>