[maemo-users] Booting from a flash card
From: sean tech.junk at myfairpoint.netDate: Sat Jul 18 00:01:58 EEST 2009
- Previous message: Booting from a flash card
- Next message: Booting from a flash card
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Rainer Dorsch wrote: > Hello, > > I used the nice wiki page http://wiki.maemo.org/Booting_from_a_flash_card to > make my N800 boot from my internal flash card (internal mmc). > > Nokia-N800-23-14:~# df > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mmcblk0p2 4096 2404 1692 59% /mnt/initfs > none 512 88 424 17% /mnt/initfs/tmp > /dev/mmcblk0p2 12019360 424824 10983976 4% / > none 512 88 424 17% /tmp > none 1024 56 968 5% /dev > tmpfs 1024 0 1024 0% /dev/shm > /dev/mmcblk0p1 3902704 1203160 2699544 31% /media/mmc2 > Nokia-N800-23-14:~# > > What does not work though is to make the internal flash card (internal mmc) > the default boot device with > > chroot /mnt/initfs cal-tool --set-root-device ask:immc2 > > The N800 always wants to boot from internal flash (flash) instead. > > Any hint what I am doing wrong is welcome... > > Thanks, > Rainer > _______________________________________________ I had the same problem. I wanted to redo the the partition sizes anyway so I went through the steps again. The differences I did were on how I answered the final questions on boot methods.
- Previous message: Booting from a flash card
- Next message: Booting from a flash card
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]