[maemo-users] N810 - executing script when digital camera is plugged in and mounted

[From: Adrián Yanes]

Plese post your script in pastebin or similar and paste the URL.


2009/10/8 Frederik Vanrenterghem <frederik at vanrenterghem.biz>

> Sounds sensible indeed. How do I actually prevent the automount though? I
> have tried figuring this out with udevmonitor, but can't really tell what's
> happening.
>
> It seems my script gets run somewhere in the middle of the following
> sequence, instead of at the end:
>
> UEVENT[1255026948.392547] add      /devices/platform/musb_hdrc/usb1/1-1
> (usb)
> UEVENT[1255026948.393310] add      /class/usb_endpoint/usbdev1.18_ep00
> (usb_endpoint)
> UEVENT[1255026948.393585] add
> /devices/platform/musb_hdrc/usb1/1-1/1-1:1.0 (usb)
> UEVENT[1255026948.393798] add      /class/scsi_host/host6 (scsi_host)
> UEVENT[1255026948.393981] add      /class/usb_endpoint/usbdev1.18_ep01
> (usb_endpoint)
> UEVENT[1255026948.394165] add      /class/usb_endpoint/usbdev1.18_ep82
> (usb_endpoint)
> UEVENT[1255026948.394378] add      /class/usb_endpoint/usbdev1.18_ep83
> (usb_endpoint)
> UEVENT[1255026948.394561] add      /class/usb_device/usbdev1.18
> (usb_device)
> UDEV  [1255026948.498626] add      /devices/platform/musb_hdrc/usb1/1-1
> (usb)
> UDEV  [1255026948.655029] add      /class/usb_endpoint/usbdev1.18_ep00
> (usb_endpoint)
> UDEV  [1255026948.701416] add
> /devices/platform/musb_hdrc/usb1/1-1/1-1:1.0 (usb)
> UDEV  [1255026948.794860] add      /class/scsi_host/host6 (scsi_host)
> UDEV  [1255026948.832946] add      /class/usb_endpoint/usbdev1.18_ep01
> (usb_endpoint)
> UDEV  [1255026948.870971] add      /class/usb_endpoint/usbdev1.18_ep82
> (usb_endpoint)
> UDEV  [1255026948.890533] add      /class/usb_endpoint/usbdev1.18_ep83
> (usb_endpoint)
> UDEV  [1255026948.963012] add      /class/usb_device/usbdev1.18
> (usb_device)
>
> here?
>
> UEVENT[1255026953.385009] add
> /devices/platform/musb_hdrc/usb1/1-1/1-1:1.0/host6/target6:0:0/6:0:0:0
> (scsi)
> UEVENT[1255026953.385467] add      /class/scsi_disk/6:0:0:0 (scsi_disk)
> UEVENT[1255026953.458374] add      /block/sda (block)
> UEVENT[1255026953.458801] add      /block/sda/sda1 (block)
> UEVENT[1255026953.459045] add      /class/scsi_device/6:0:0:0 (scsi_device)
> UDEV  [1255026953.488525] add
> /devices/platform/musb_hdrc/usb1/1-1/1-1:1.0/host6/target6:0:0/6:0:0:0
> (scsi)
> UDEV  [1255026953.726104] add      /class/scsi_disk/6:0:0:0 (scsi_disk)
> UDEV  [1255026953.755218] add      /block/sda (block)
> UDEV  [1255026953.778747] add      /class/scsi_device/6:0:0:0 (scsi_device)
> UDEV  [1255026953.847900] add      /block/sda/sda1 (block)
> UEVENT[1255026955.123718] mount    /block/sda/sda1 (block)
> UDEV  [1255026955.834564] mount    /block/sda/sda1 (block)
>
>
> On Thu, Oct 8, 2009 at 8:25 PM, Adrián Yanes  wrote:
>
>> Try yo exclude your camera for automount. Then include in your script the
>> command mount and after done ( you can obtain some scripts for detect the
>> partition without automount). Probably works, because I think that your
>> problem it's desynchronization, in one way you are mouting and in the other
>> executing a script ( that sometimes works and others not I suppouse ...
>> depend of the charge of the system).
>>
>> Try to put all in the same script, this will be de process sequential.
>>
>> Regards, Adrian.
>>
>> 2009/10/8 Frederik Vanrenterghem
>>
>>> Hi all,
>>>
>>> I would like to execute a script that copies the pictures from my digital
>>> camera when it's plugged into my nokia tablet. The script functions
>>> correctly when executed from the command-line after plugging in the camera.
>>>
>>> Adding the following rule to /etc/udev/rules.d/zz99_camera.rules works
>>> only partially:
>>> ACTION=="add", BUS=="usb", \
>>>   SYSFS{idVendor}=="054c", SYSFS{idProduct}=="0010", \
>>>   RUN+="/home/user/autoPicturesImport.sh"
>>>
>>> The script is executed correctly, but it can't copy anything from the
>>> mounted camera, as the file system on it is not available. That is made
>>> available only once this script completes (as evidenced by including a long
>>> sleep command in there).
>>>
>>> How can I ensure all actions to automount the camera are completed before
>>> this script is executed?
>>>
>>> Thanks in advance for your insight!
>>>
>>> Best regards,
>>> Frederik
>>>
>>>
>>> _______________________________________________
>>> maemo-users mailing list
>>> maemo-users at maemo.org
>>> https://lists.maemo.org/mailman/listinfo/maemo-users
>>>
>>>
>>
>> _______________________________________________
>> maemo-users mailing list
>> maemo-users at maemo.org
>> https://lists.maemo.org/mailman/listinfo/maemo-users
>>
>>
>
> _______________________________________________
> maemo-users mailing list
> maemo-users at maemo.org
> https://lists.maemo.org/mailman/listinfo/maemo-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.maemo.org/pipermail/maemo-users/attachments/20091008/91e9ae50/attachment.htm