[maemo-users] n900: usb keyb and h-e-n

From: Dirk schoappied at gmail.com
Date: Tue Aug 23 18:31:07 EEST 2011 
Hi,

Is this the right place to ask this question? It would be a big deal for 
me if I got this working.

Thanks.

Dirk

On 08/22/2011 03:55 PM, Dirk wrote:
> Hi,
>
> I can't get my Lenovo SK8855 usb keybd working on my n900.
> http://www.notebookreview.com/default.asp?newsID=5387
>
> I have such usb usb connector
> http://www.dealextreme.com/p/usb-cable-coupler-extension-connector-2646
>
> Then I start h-e-n
>
> First message: 'stopping BME'
>
> Then I choose:
> > low speed hostmode
> >VBUS boost on
> > enumerate
>
> >> connect usb-keybd to n900
>
> > mount
>
> But nothing is happening ... when I try to type in a xterm.
>
> I can't turn on Capslock.
>
> Also mouse does nothing. When I connect and mount a usb stick, it says 
> 'unable to connect, no file system available'
>
> System information, see below.
>
> Thanks in advance!
> Dirk
>
> [code]  sudo fdisk-l (in ubuntu)
>  Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1               1         449     3606561    b  W95 FAT32
> /dev/sdb2             450         487      305235    b  W95 FAT32[/code]
>
> [code]# apt-cache policy kernel-power-bootimg
> kernel-power-bootimg:
>   Installed: 1:2.6.28-10power47
>
> # apt-cache policy kernel-power
> kernel-power:
>   Installed: 1:2.6.28-10power47
>
> # apt-cache policy  hostmode-gui
> hostmode-gui:
>   Installed: 0.3
>
> [/code]
>
> [code]# lsusb -v
>
> Bus 001 Device 001: ID 1d6b:0002
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            9 Hub
>   bDeviceSubClass         0 Unused
>   bDeviceProtocol         0 Full speed hub
>   bMaxPacketSize0        64
>   idVendor           0x1d6b
>   idProduct          0x0002
>   bcdDevice            2.06
>   iManufacturer           3 Linux 2.6.28.10-power47 musb-hcd
>   iProduct                2 MUSB HDRC host driver
>   iSerial                 1 musb_hdrc
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           25
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xe0
>       Self Powered
>       Remote Wakeup
>     MaxPower                0mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass         9 Hub
>       bInterfaceSubClass      0 Unused
>       bInterfaceProtocol      0 Full speed hub
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>  Usage Type               Data
>         wMaxPacketSize     0x0004  1x 4 bytes
>         bInterval              12
> Hub Descriptor:
>   bLength               9
>   bDescriptorType      41
>   nNbrPorts             1
>   wHubCharacteristic 0x0011
>     Per-port power switching
>     No overcurrent protection
>   bPwrOn2PwrGood        5 * 2 milli seconds
>   bHubContrCurrent      0 milli Ampere
>   DeviceRemovable    0x02
>   PortPwrCtrlMask    0xff
>  Hub Port Status:
>    Port 1: 0002.0301 C_ENABLE lowspeed power connect
> Device Status:     0x0003
>   Self Powered
>   Remote Wakeup Enabled[/code]
>
> [code]# dmesg
>  mBi, 2300 mBm)
> [ 1194.606079]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 
> 3000 mBm)
> [ 1195.821289] wl1251: down
> [ 1199.649200] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
> [ 1199.664825] wl1251: firmware booted (Rev 4.0.4.3.7)
> [ 1199.725463] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 1200.317230] wlan0: authenticate with AP 00:23:69:15:11:c7
> [ 1200.320617] wlan0: authenticated
> [ 1200.320678] wlan0: associate with AP 00:23:69:15:11:c7
> [ 1200.324340] wlan0: RX AssocResp from 00:23:69:15:11:c7 (capab=0x411 
> status=0 aid=2)
> [ 1200.324371] wlan0: associated
> [ 1200.376251] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 1210.813354] wlan0: no IPv6 routers present
> [ 1626.887573] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
> [ 1627.426116] Forced hostmode error: no device attached
> [ 1627.426208] usb usb1: usb resume
> [ 1627.446166] hub 1-0:1.0: hub_resume
> [ 1627.446228] hub 1-0:1.0: port 1: status 0301 change 0001
> [ 1627.555389] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
> [ 1627.555450] hub 1-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
> [ 1627.680450] usb 1-1: new low speed USB device using musb_hdrc and 
> address 18
> [ 1632.672790] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
> [ 1632.680419] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1637.680419] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1642.680328] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1642.805358] usb 1-1: device descriptor read/64, error -110
> [ 1647.914916] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1652.914764] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1657.914794] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1658.039886] usb 1-1: device descriptor read/64, error -110
> [ 1658.274261] usb 1-1: new low speed USB device using musb_hdrc and 
> address 19
> [ 1663.274169] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1668.274261] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1673.274291] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1673.399139] usb 1-1: device descriptor read/64, error -110
> [ 1678.509826] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1683.508575] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1688.508575] usb 1-1: khubd timed out on ep0in len=0/64
> [ 1688.633758] usb 1-1: device descriptor read/64, error -110
> [ 1688.868072] usb 1-1: new low speed USB device using musb_hdrc and 
> address 20
> [ 1694.868408] ------------[ cut here ]------------
> [ 1694.868469] WARNING: at 
> /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 
> musb_h_tx_flush_fifo+0x94/0xcc()
> [ 1694.868530] Could not flush host TX0 fifo: csr: 000a
> [ 1694.868560] Modules linked in: wl12xx vfat fat sd_mod scsi_mod iphb 
> rfcomm panic_info_buff sco l2cap ext3 omaplfb jbd pvrsrvkm 
> bridgedriver ipv6 g_file_storage uinput board_rx51_camera 
> omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg 
> videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp 
> mmc_block phonet joydev cmt_speech omap_hsmmc smc91x mii mac80211 crc7 
> omap_ssi omap_wdt nokia_av mmc_core cfg80211 hci_h4p tsc2005 bluetooth 
> rtc_twl4030 rtc_core fmtx_si4713 et8ek8 adp1653 ad5820 bq27x00_battery 
> smia_sensor leds_twl4030_vibra leds_lp5523 twl4030_wdt videodev 
> v4l1_compat lis302dl tsl2563 power_supply smiaregs compat_ioctl32 
> led_class v4l2_int_device fuse [last unloaded: wl12xx]
> [ 1694.869140] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] 
> (warn_slowpath+0x64/0x80)
> [ 1694.869232] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a80>] 
> (musb_h_tx_flush_fifo+0x94/0xcc)
> [ 1694.869323]  r3:00000000 r2:c034453d
> [ 1694.869354]  r6:d80ab100 r5:0000000a r4:0000000a
> [ 1694.869384] [<c01e99ec>] (musb_h_tx_flush_fifo+0x0/0xcc) from 
> [<c01ea950>] (musb_cleanup_urb+0xc0/0x10c)
> [ 1694.869445] [<c01ea890>] (musb_cleanup_urb+0x0/0x10c) from 
> [<c01eb154>] (musb_urb_dequeue+0x1dc/0x248)
> [ 1694.869537] [<c01eaf78>] (musb_urb_dequeue+0x0/0x248) from 
> [<c01cecbc>] (unlink1+0x108/0x114)
> [ 1694.869598] [<c01cebb4>] (unlink1+0x0/0x114) from [<c01cfc58>] 
> (usb_hcd_unlink_urb+0x9c/0xf8)
> [ 1694.869689] [<c01cfbbc>] (usb_hcd_unlink_urb+0x0/0xf8) from 
> [<c01d0b14>] (usb_kill_urb+0x84/0x14c)
> [ 1694.869750]  r7:ce6dc480 r6:ce6dc480 r5:cf0a6000 r4:00000000
> [ 1694.869812] [<c01d0a90>] (usb_kill_urb+0x0/0x14c) from [<c01d1d98>] 
> (usb_start_wait_urb+0x80/0x120)
> [ 1694.869873]  r6:00001388 r5:cf0a7e50 r4:00000000
> [ 1694.869934] [<c01d1d18>] (usb_start_wait_urb+0x0/0x120) from 
> [<c01d2018>] (usb_control_msg+0xc4/0xe8)
> [ 1694.869995] [<c01d1f54>] (usb_control_msg+0x0/0xe8) from 
> [<c01cad0c>] (hub_port_init+0x3d8/0x634)
> [ 1694.870056] [<c01ca934>] (hub_port_init+0x0/0x634) from 
> [<c01cc404>] (hub_events+0x86c/0xe64)
> [ 1694.870147] [<c01cbb98>] (hub_events+0x0/0xe64) from [<c01ce054>] 
> (hub_thread+0x30/0x19c)
> [ 1694.870208] [<c01ce024>] (hub_thread+0x0/0x19c) from [<c006da90>] 
> (kthread+0x54/0x80)
> [ 1694.870269]  r6:00000000 r5:c01ce024 r4:00000000
> [ 1694.870300] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] 
> (do_exit+0x0/0x7bc)
> [ 1694.870361]  r5:00000000 r4:00000000
> [ 1694.870422] ---[ end trace 6fb00ab8cbf39d25 ]---
> [ 1694.872497] usb 1-1: khubd timed out on ep0out len=0/0
> [ 1701.079345] ------------[ cut here ]------------
> [ 1701.079406] WARNING: at 
> /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 
> musb_h_tx_flush_fifo+0x94/0xcc()
> [ 1701.079467] Could not flush host TX0 fifo: csr: 000a
> [ 1701.079498] Modules linked in: wl12xx vfat fat sd_mod scsi_mod iphb 
> rfcomm panic_info_buff sco l2cap ext3 omaplfb jbd pvrsrvkm 
> bridgedriver ipv6 g_file_storage uinput board_rx51_camera 
> omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg 
> videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp 
> mmc_block phonet joydev cmt_speech omap_hsmmc smc91x mii mac80211 crc7 
> omap_ssi omap_wdt nokia_av mmc_core cfg80211 hci_h4p tsc2005 bluetooth 
> rtc_twl4030 rtc_core fmtx_si4713 et8ek8 adp1653 ad5820 bq27x00_battery 
> smia_sensor leds_twl4030_vibra leds_lp5523 twl4030_wdt videodev 
> v4l1_compat lis302dl tsl2563 power_supply smiaregs compat_ioctl32 
> led_class v4l2_int_device fuse [last unloaded: wl12xx]
> [ 1701.080078] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] 
> (warn_slowpath+0x64/0x80)
> [ 1701.080169] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a80>] 
> (musb_h_tx_flush_fifo+0x94/0xcc)
> [ 1701.080261]  r3:00000000 r2:c034453d
> [ 1701.080291]  r6:d80ab100 r5:0000000a r4:0000000a
> [ 1701.080322] [<c01e99ec>] (musb_h_tx_flush_fifo+0x0/0xcc) from 
> [<c01ea950>] (musb_cleanup_urb+0xc0/0x10c)
> [ 1701.080383] [<c01ea890>] (musb_cleanup_urb+0x0/0x10c) from 
> [<c01eb154>] (musb_urb_dequeue+0x1dc/0x248)
> [ 1701.080474] [<c01eaf78>] (musb_urb_dequeue+0x0/0x248) from 
> [<c01cecbc>] (unlink1+0x108/0x114)
> [ 1701.080535] [<c01cebb4>] (unlink1+0x0/0x114) from [<c01cfc58>] 
> (usb_hcd_unlink_urb+0x9c/0xf8)
> [ 1701.080596] [<c01cfbbc>] (usb_hcd_unlink_urb+0x0/0xf8) from 
> [<c01d0b14>] (usb_kill_urb+0x84/0x14c)
> [ 1701.080688]  r7:ce6dc480 r6:ce6dc480 r5:cf0a6000 r4:00000000
> [ 1701.080749] [<c01d0a90>] (usb_kill_urb+0x0/0x14c) from [<c01d1d98>] 
> (usb_start_wait_urb+0x80/0x120)
> [ 1701.080810]  r6:00001388 r5:cf0a7e50 r4:00000000
> [ 1701.080841] [<c01d1d18>] (usb_start_wait_urb+0x0/0x120) from 
> [<c01d2018>] (usb_control_msg+0xc4/0xe8)
> [ 1701.080932] [<c01d1f54>] (usb_control_msg+0x0/0xe8) from 
> [<c01cad0c>] (hub_port_init+0x3d8/0x634)
> [ 1701.080993] [<c01ca934>] (hub_port_init+0x0/0x634) from 
> [<c01cc404>] (hub_events+0x86c/0xe64)
> [ 1701.081054] [<c01cbb98>] (hub_events+0x0/0xe64) from [<c01ce054>] 
> (hub_thread+0x30/0x19c)
> [ 1701.081146] [<c01ce024>] (hub_thread+0x0/0x19c) from [<c006da90>] 
> (kthread+0x54/0x80)
> [ 1701.081207]  r6:00000000 r5:c01ce024 r4:00000000
> [ 1701.081237] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] 
> (do_exit+0x0/0x7bc)
> [ 1701.081298]  r5:00000000 r4:00000000
> [ 1701.081329] ---[ end trace 6fb00ab8cbf39d25 ]---
> [ 1701.083740] usb 1-1: khubd timed out on ep0out len=0/0
> [ 1701.289855] usb 1-1: device not accepting address 20, error -110
> [ 1701.414886] usb 1-1: new low speed USB device using musb_hdrc and 
> address 21
> [ 1707.415283] ------------[ cut here ]------------
> [ 1707.415344] WARNING: at 
> /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 
> musb_h_tx_flush_fifo+0x94/0xcc()
> [ 1707.415405] Could not flush host TX0 fifo: csr: 000a
> [ 1707.415435] Modules linked in: wl12xx vfat fat sd_mod scsi_mod iphb 
> rfcomm panic_info_buff sco l2cap ext3 omaplfb jbd pvrsrvkm 
> bridgedriver ipv6 g_file_storage uinput board_rx51_camera 
> omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg 
> videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp 
> mmc_block phonet joydev cmt_speech omap_hsmmc smc91x mii mac80211 crc7 
> omap_ssi omap_wdt nokia_av mmc_core cfg80211 hci_h4p tsc2005 bluetooth 
> rtc_twl4030 rtc_core fmtx_si4713 et8ek8 adp1653 ad5820 bq27x00_battery 
> smia_sensor leds_twl4030_vibra leds_lp5523 twl4030_wdt videodev 
> v4l1_compat lis302dl tsl2563 power_supply smiaregs compat_ioctl32 
> led_class v4l2_int_device fuse [last unloaded: wl12xx]
> [ 1707.416015] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] 
> (warn_slowpath+0x64/0x80)
> [ 1707.416107] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a80>] 
> (musb_h_tx_flush_fifo+0x94/0xcc)
> [ 1707.416168]  r3:00000000 r2:c034453d
> [ 1707.416198]  r6:d80ab100 r5:0000000a r4:0000000a
> [ 1707.416259] [<c01e99ec>] (musb_h_tx_flush_fifo+0x0/0xcc) from 
> [<c01ea950>] (musb_cleanup_urb+0xc0/0x10c)
> [ 1707.416320] [<c01ea890>] (musb_cleanup_urb+0x0/0x10c) from 
> [<c01eb154>] (musb_urb_dequeue+0x1dc/0x248)
> [ 1707.416381] [<c01eaf78>] (musb_urb_dequeue+0x0/0x248) from 
> [<c01cecbc>] (unlink1+0x108/0x114)
> [ 1707.416473] [<c01cebb4>] (unlink1+0x0/0x114) from [<c01cfc58>] 
> (usb_hcd_unlink_urb+0x9c/0xf8)
> [ 1707.416534] [<c01cfbbc>] (usb_hcd_unlink_urb+0x0/0xf8) from 
> [<c01d0b14>] (usb_kill_urb+0x84/0x14c)
> [ 1707.416595]  r7:ce6dc480 r6:ce6dc480 r5:cf0a6000 r4:00000000
> [ 1707.416656] [<c01d0a90>] (usb_kill_urb+0x0/0x14c) from [<c01d1d98>] 
> (usb_start_wait_urb+0x80/0x120)
> [ 1707.416748]  r6:00001388 r5:cf0a7e50 r4:00000000
> [ 1707.416778] [<c01d1d18>] (usb_start_wait_urb+0x0/0x120) from 
> [<c01d2018>] (usb_control_msg+0xc4/0xe8)
> [ 1707.416839] [<c01d1f54>] (usb_control_msg+0x0/0xe8) from 
> [<c01cad0c>] (hub_port_init+0x3d8/0x634)
> [ 1707.416931] [<c01ca934>] (hub_port_init+0x0/0x634) from 
> [<c01cc404>] (hub_events+0x86c/0xe64)
> [ 1707.416992] [<c01cbb98>] (hub_events+0x0/0xe64) from [<c01ce054>] 
> (hub_thread+0x30/0x19c)
> [ 1707.417053] [<c01ce024>] (hub_thread+0x0/0x19c) from [<c006da90>] 
> (kthread+0x54/0x80)
> [ 1707.417114]  r6:00000000 r5:c01ce024 r4:00000000
> [ 1707.417175] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] 
> (do_exit+0x0/0x7bc)
> [ 1707.417236]  r5:00000000 r4:00000000
> [ 1707.417266] ---[ end trace 6fb00ab8cbf39d25 ]---
> [ 1707.418090] usb 1-1: khubd timed out on ep0out len=0/0
> [ 1713.626220] ------------[ cut here ]------------
> [ 1713.626281] WARNING: at 
> /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 
> musb_h_tx_flush_fifo+0x94/0xcc()
> [ 1713.626342] Could not flush host TX0 fifo: csr: 000a
> [ 1713.626373] Modules linked in: wl12xx vfat fat sd_mod scsi_mod iphb 
> rfcomm panic_info_buff sco l2cap ext3 omaplfb jbd pvrsrvkm 
> bridgedriver ipv6 g_file_storage uinput board_rx51_camera 
> omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg 
> videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp 
> mmc_block phonet joydev cmt_speech omap_hsmmc smc91x mii mac80211 crc7 
> omap_ssi omap_wdt nokia_av mmc_core cfg80211 hci_h4p
>
> ...
> ....[/code]
More information about the maemo-users mailing list