[maemo-developers] [maemo-developers] Using the N770/N800 as a remote control.
From: Jon Smirl jonsmirl at gmail.comDate: Wed Jan 10 16:36:48 EET 2007
- Previous message: [maemo-developers] Using the N770/N800 as a remote control.
- Next message: [maemo-developers] Using the N770/N800 as a remote control.
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
On 1/10/07, klaus at rotters.de <klaus at rotters.de> wrote: > Am 9 Jan 2007 um 21:52 hat Jon Smirl geschrieben: > > Is it no power at all, or just not very much power? With no power you > > No power. Rumors said, that it is because there is nowehere inside the N770 +5 Volt, the > device runs with 3.3 V or less. Since I don't have the schematics, I can't prove that. So how about the N800, does it have power? Is it a complete USB OTG implementation? 770 puts out a USB OTG descriptor when it isn't compliant. On 1/10/07, David Brownell <david-b at pacbell.net> wrote: > On Tuesday 09 January 2007 10:26 pm, Jon Smirl wrote: > > On 1/9/07, David Brownell <david-b at pacbell.net> wrote: > > > > It has a high speed USB > > > > OTG port (host/client) > > > > > > That's the N800 ... uses a TUSB6010 chip, the driver for which was a PITA > > > but it basically works. (And the CPU is much faster than the N770; it > > > uses an ARMv6 CPU, running at a faster clock rate.) > > > > > > As I understand, the device has a Mini-B port, not a Mini-AB. But other > > > than that it's pretty much ready to be a dual-role device ... not full > > > fledged OTG yet, but I've certainly observed the cable based role switch > > > stuff to work. > > > > 770 is supposed to have OTG too. > > Not without providing at least 8ma VBUS power and a Mini-AB connector > it isn't. Instead, it provides 0mA VBUS power and a Mini-B connector. :) > > The Tahvo chip has a USB transceiver that's not really OTG-capable. > But it can do "dual role", that is it can switch between host and > peripheral modes ... which is an OTG thing, if done the OTG way. > Which means initial role sensing via the cable connected to the Mini-AB > port, and HNP support to automatically switch roles later. > > > > I got the network to work. Seems there are problems with having the > > net and storage running simultaneously. This has an OTG Descriptor in > > it that is new to me. > > It's a standard OTG descriptor, but the device shouldn't be putting > one out since it's not OTG-conformant. > > - Dave > -- Jon Smirl jonsmirl at gmail.com
- Previous message: [maemo-developers] Using the N770/N800 as a remote control.
- Next message: [maemo-developers] Using the N770/N800 as a remote control.
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]