[maemo-developers] Maemo-Optify & Builder Bots = Broken?
From: Kamen Bundev bundyo at gmail.comDate: Thu Oct 22 09:40:39 EEST 2009
- Previous message: Maemo-Optify & Builder Bots = Broken?
- Next message: Maemo-Optify & Builder Bots = Broken?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Yup, just read it :) Thanks. Regards: Bundyo On Thu, Oct 22, 2009 at 9:38 AM, Ed Bartosh <bartosh at gmail.com> wrote: > Hi, > > Please read my last message. The issue is fixed. Nobody should do > anything except of SDK guys. > > 2009/10/22 Kamen Bundev <bundyo at gmail.com>: > > Hi guys, > > > > I've played around with maemo-optify yesterday and decided to instead of > > creating the paths in the package subdir, to create a symlink to /opt and > > drop everything there before packaging. Wrong move, dpkg-deb doesn't > follow > > symlinks, it packages them :) So, the logical step was to instead of > symlink > > to /opt, to create home/opt in the package subdir and symlink opt/ to it. > > That worked and I have a package ready that will work in the device, but > I'm > > hesitant to try it in the autobuilder because if the autobuilder is like > > scratchbox, then the package will be installed to /home/opt but the /opt > > symlinks will point to somewhere else (/targets/links/opt) and the build > > will fail anyway. > > > > So my question is - is this the right way to go about this and can I > control > > where the /opt dir is symlinked to in the autobuilder? > > > > Regards: > > Bundyo > > > > On Thu, Oct 22, 2009 at 2:35 AM, Nathan Anderson < > nathan at andersonsplace.net> > > wrote: > >> > >> Kamen, > >> > >> I build both binary target and source targets debs in my scratchbox > >> before I upload. For instance last night I had to rebuild the binary > debs > >> about 20 times (trying to get a weird make file rule to work). Once I > got > >> it working then I would copy my rules to a fresh copy and re-run a > source > >> deb then re-run a binary once more just to make sure it wasn't "left" > over > >> stuff causing a success. ;-) > >> > >> So, I don't think it has anything to do with the scratchbox. I > suspect > >> it as Ed found something to do with the symlink -> directory or > something in > >> their on the auto-builder. > >> > >> Nathan. > >> ________________________________ > >> From: Kamen Bundev [mailto:bundyo at gmail.com] > >> Sent: Wednesday, October 21, 2009 6:14 PM > >> To: Nathan Anderson > >> Cc: maemo-developers at maemo.org > >> Subject: Re: Maemo-Optify & Builder Bots = Broken? > >> > >> Nah, that's not enough. Still fails. > >> > >> Another difference is that I'm building my optified package in > scratchbox > >> before upload and the other people are using the autobuilder, so the > problem > >> should be somewhere else. > >> > >> Regards: > >> Bundyo > >> > >> On Thu, Oct 22, 2009 at 2:09 AM, Kamen Bundev <bundyo at gmail.com> wrote: > >>> > >>> Nah, that's not enough. Still fails. > >>> > >>> Regards: > >>> Bundyo > >>> > >>> On Thu, Oct 22, 2009 at 12:52 AM, Kamen Bundev <bundyo at gmail.com> > wrote: > >>>> > >>>> Looks like the only difference here is that my /opt should be pointing > >>>> to /targets/links/opt which is symlinked to the proper target on > target > >>>> change. Uploading the new package to extras now. > >>>> > >>>> Regards: > >>>> Bundyo > >>>> > >>>> On Thu, Oct 22, 2009 at 12:39 AM, Nathan Anderson > >>>> <nathan at andersonsplace.net> wrote: > >>>>> > >>>>> Ed, > >>>>> > >>>>> I believe this is what you are asking: > >>>>> FREMANTLE_ARMEL cs2007q3-glibc2.5-arm7 > >>>>> FREMANTLE_X86 cs2007q3-glibc2.5-i486 > >>>>> > >>>>> > >>>>> Nathan > >>>>> > >>>>> -----Original Message----- > >>>>> From: Ed Bartosh [mailto:bartosh at gmail.com] > >>>>> Sent: Wednesday, October 21, 2009 4:03 PM > >>>>> To: Nathan Anderson > >>>>> Cc: maemo-developers at maemo.org > >>>>> Subject: Re: Maemo-Optify & Builder Bots = Broken? > >>>>> > >>>>> 2009/10/21 Nathan Anderson <nathan at andersonsplace.net>: > >>>>> > Ed, > >>>>> > > >>>>> > Sure can (and following the chain). > >>>>> > > >>>>> > ls -l / | grep opt > >>>>> > lrwxrwxrwx 1 root root 18 Oct 6 22:36 opt -> > >>>>> > /targets/links/opt > >>>>> > > >>>>> > ls -l /targets/links/ | grep opt > >>>>> > lrwxrwxrwx 1 maemo 1000 26 Oct 19 16:55 opt -> > >>>>> > /targets/FREMANTLE_X86/opt > >>>>> > > >>>>> I've found the difference! > >>>>> In your environment /targets/<target>/opt is a directory. In > >>>>> autobuilder > >>>>> environment it's a symlink: > >>>>> > >>>>> > ls -l /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ > >>>>> > |grep opt > >>>>> lrwxrwxrwx 1 builder1 builder1 9 Oct 21 23:50 opt -> /home/opt > >>>>> > >>>>> And it looks like it becomes symlink after rootstrap unpacking. Look: > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > > sb-conf > >>>>> re > >>>>> -f > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l > >>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep > opt > >>>>> drwxrwxr-x 2 1005 1006 4096 Oct 21 23:56 opt > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > > sb-conf > >>>>> in > >>>>> --etc --devkits > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l > >>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep > opt > >>>>> drwxrwxr-x 2 builder1 builder1 4096 Oct 21 23:56 opt > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > > sb-conf > >>>>> in > >>>>> --fakeroot Installing fakeroot version 1.4.2.1... > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l > >>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep > opt > >>>>> drwxrwxr-x 2 builder1 builder1 4096 Oct 21 23:56 opt > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > > sb-conf > >>>>> rs > >>>>> /scratchbox/packages/maemo-sdk-rootstrap_5.0_armel.tgz > >>>>> Unpacking rootstrap... > >>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l > >>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep > opt > >>>>> lrwxrwxrwx 1 1005 1006 9 Oct 21 23:57 opt -> /home/opt > >>>>> > >>>>> So, the difference is in rootstraps. Tell me which rootstrap do you > use > >>>>> and > >>>>> I'll compare it with the one autobuilder uses. > >>>>> > >>>>> -- > >>>>> BR, > >>>>> Ed > >>>>> > >>>>> _______________________________________________ > >>>>> maemo-developers mailing list > >>>>> maemo-developers at maemo.org > >>>>> https://lists.maemo.org/mailman/listinfo/maemo-developers > >>>> > >>> > >> > > > > > > _______________________________________________ > > maemo-developers mailing list > > maemo-developers at maemo.org > > https://lists.maemo.org/mailman/listinfo/maemo-developers > > > > > > > > -- > BR, > Ed > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.maemo.org/pipermail/maemo-developers/attachments/20091022/afd0844e/attachment.htm
- Previous message: Maemo-Optify & Builder Bots = Broken?
- Next message: Maemo-Optify & Builder Bots = Broken?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]