[maemo-developers] Maemo-Optify & Builder Bots = Broken?
From: Ed Bartosh bartosh at gmail.comDate: Thu Oct 22 10:17:04 EEST 2009
- Previous message: Maemo-Optify & Builder Bots = Broken?
- Next message: Maemo-Optify & Builder Bots = Broken?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi, I restarted Nathan's build and autobuilder seems to be able to install all build-deps. You can see autobuilder logs here soon: https://garage.maemo.org/builder/fremantle/sword_1.6.0a-0maemo1/ 2009/10/22 Ed Bartosh <bartosh at gmail.com>: > Hi, > > Please read my last message. The issue is fixed. Nobody should do > anything except of SDK guys. > > 2009/10/22 Kamen Bundev <bundyo at gmail.com>: >> Hi guys, >> >> I've played around with maemo-optify yesterday and decided to instead of >> creating the paths in the package subdir, to create a symlink to /opt and >> drop everything there before packaging. Wrong move, dpkg-deb doesn't follow >> symlinks, it packages them :) So, the logical step was to instead of symlink >> to /opt, to create home/opt in the package subdir and symlink opt/ to it. >> That worked and I have a package ready that will work in the device, but I'm >> hesitant to try it in the autobuilder because if the autobuilder is like >> scratchbox, then the package will be installed to /home/opt but the /opt >> symlinks will point to somewhere else (/targets/links/opt) and the build >> will fail anyway. >> >> So my question is - is this the right way to go about this and can I control >> where the /opt dir is symlinked to in the autobuilder? >> >> Regards: >> Bundyo >> >> On Thu, Oct 22, 2009 at 2:35 AM, Nathan Anderson <nathan at andersonsplace.net> >> wrote: >>> >>> Kamen, >>> >>> I build both binary target and source targets debs in my scratchbox >>> before I upload. For instance last night I had to rebuild the binary debs >>> about 20 times (trying to get a weird make file rule to work). Once I got >>> it working then I would copy my rules to a fresh copy and re-run a source >>> deb then re-run a binary once more just to make sure it wasn't "left" over >>> stuff causing a success. ;-) >>> >>> So, I don't think it has anything to do with the scratchbox. I suspect >>> it as Ed found something to do with the symlink -> directory or something in >>> their on the auto-builder. >>> >>> Nathan. >>> ________________________________ >>> From: Kamen Bundev [mailto:bundyo at gmail.com] >>> Sent: Wednesday, October 21, 2009 6:14 PM >>> To: Nathan Anderson >>> Cc: maemo-developers at maemo.org >>> Subject: Re: Maemo-Optify & Builder Bots = Broken? >>> >>> Nah, that's not enough. Still fails. >>> >>> Another difference is that I'm building my optified package in scratchbox >>> before upload and the other people are using the autobuilder, so the problem >>> should be somewhere else. >>> >>> Regards: >>> Bundyo >>> >>> On Thu, Oct 22, 2009 at 2:09 AM, Kamen Bundev <bundyo at gmail.com> wrote: >>>> >>>> Nah, that's not enough. Still fails. >>>> >>>> Regards: >>>> Bundyo >>>> >>>> On Thu, Oct 22, 2009 at 12:52 AM, Kamen Bundev <bundyo at gmail.com> wrote: >>>>> >>>>> Looks like the only difference here is that my /opt should be pointing >>>>> to /targets/links/opt which is symlinked to the proper target on target >>>>> change. Uploading the new package to extras now. >>>>> >>>>> Regards: >>>>> Bundyo >>>>> >>>>> On Thu, Oct 22, 2009 at 12:39 AM, Nathan Anderson >>>>> <nathan at andersonsplace.net> wrote: >>>>>> >>>>>> Ed, >>>>>> >>>>>> I believe this is what you are asking: >>>>>> FREMANTLE_ARMEL cs2007q3-glibc2.5-arm7 >>>>>> FREMANTLE_X86 cs2007q3-glibc2.5-i486 >>>>>> >>>>>> >>>>>> Nathan >>>>>> >>>>>> -----Original Message----- >>>>>> From: Ed Bartosh [mailto:bartosh at gmail.com] >>>>>> Sent: Wednesday, October 21, 2009 4:03 PM >>>>>> To: Nathan Anderson >>>>>> Cc: maemo-developers at maemo.org >>>>>> Subject: Re: Maemo-Optify & Builder Bots = Broken? >>>>>> >>>>>> 2009/10/21 Nathan Anderson <nathan at andersonsplace.net>: >>>>>> > Ed, >>>>>> > >>>>>> > Sure can (and following the chain). >>>>>> > >>>>>> > ls -l / | grep opt >>>>>> > lrwxrwxrwx 1 root root 18 Oct 6 22:36 opt -> >>>>>> > /targets/links/opt >>>>>> > >>>>>> > ls -l /targets/links/ | grep opt >>>>>> > lrwxrwxrwx 1 maemo 1000 26 Oct 19 16:55 opt -> >>>>>> > /targets/FREMANTLE_X86/opt >>>>>> > >>>>>> I've found the difference! >>>>>> In your environment /targets/<target>/opt is a directory. In >>>>>> autobuilder >>>>>> environment it's a symlink: >>>>>> >>>>>> > ls -l /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ >>>>>> > |grep opt >>>>>> lrwxrwxrwx 1 builder1 builder1 9 Oct 21 23:50 opt -> /home/opt >>>>>> >>>>>> And it looks like it becomes symlink after rootstrap unpacking. Look: >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > sb-conf >>>>>> re >>>>>> -f >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l >>>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep opt >>>>>> drwxrwxr-x 2 1005 1006 4096 Oct 21 23:56 opt >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > sb-conf >>>>>> in >>>>>> --etc --devkits >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l >>>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep opt >>>>>> drwxrwxr-x 2 builder1 builder1 4096 Oct 21 23:56 opt >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > sb-conf >>>>>> in >>>>>> --fakeroot Installing fakeroot version 1.4.2.1... >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l >>>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep opt >>>>>> drwxrwxr-x 2 builder1 builder1 4096 Oct 21 23:56 opt >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > sb-conf >>>>>> rs >>>>>> /scratchbox/packages/maemo-sdk-rootstrap_5.0_armel.tgz >>>>>> Unpacking rootstrap... >>>>>> [sbox-maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c: ~] > ls -l >>>>>> /targets/maemo5-arm-183e1d1de998260fa89b870d65b22998c6908b6c/ |grep opt >>>>>> lrwxrwxrwx 1 1005 1006 9 Oct 21 23:57 opt -> /home/opt >>>>>> >>>>>> So, the difference is in rootstraps. Tell me which rootstrap do you use >>>>>> and >>>>>> I'll compare it with the one autobuilder uses. >>>>>> >>>>>> -- >>>>>> BR, >>>>>> Ed >>>>>> >>>>>> _______________________________________________ >>>>>> maemo-developers mailing list >>>>>> maemo-developers at maemo.org >>>>>> https://lists.maemo.org/mailman/listinfo/maemo-developers >>>>> >>>> >>> >> >> >> _______________________________________________ >> maemo-developers mailing list >> maemo-developers at maemo.org >> https://lists.maemo.org/mailman/listinfo/maemo-developers >> >> > > > > -- > BR, > Ed > -- BR, Ed
- Previous message: Maemo-Optify & Builder Bots = Broken?
- Next message: Maemo-Optify & Builder Bots = Broken?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]