[maemo-developers] Notification LED (blue color) in PR 1.2

[From: saurabh aggarwal]

Btw, is there a way (API or command) to change the LED settings without
going to the settings application?

-Saurabh

On Wed, Jun 23, 2010 at 4:49 PM, saurabh aggarwal <
aggarwal.saurabh at gmail.com> wrote:

> Thanks, the settings of notification lights had IM notifications not
> selected. The settings must have been reset during the 1.1 to 1.2 upgrade.
>
> Fixing the settings fixed the problem.
>
> Thanks,
> -Saurabh
>
>   On Wed, Jun 23, 2010 at 4:40 PM, Joerg Reisenweber <joerg at openmoko.org>wrote:
>
>> [saurabh aggarwal Mi  23. Juni 2010]:
>>  > Looks like it is no longer working. I tried with the dbus command that
>> used
>> > to work with PR 1.1 (
>> http://wiki.maemo.org/Phone_control#Deactivate_LEDs),
>> > and it doesn't work. I also tried sending an IM message to the native IM
>> > application, and even that didn't turn the blue LED on.
>> >
>> > Can some one confirm the break?
>> >
>> > -Saurabh
>> >
>> No, seems to work usually.
>> Have you checked your indicator light settings in settings app?
>> Please notice the PatternCommunicationIM blue flashing is only while
>> screen is
>> dim and only for IM, aiui.
>> Also your link is to DEactivate_LEDs - probably a mishap.
>> you could do a
>> echo 50 > /sys/class/leds/lp5523:b/brightness
>> to power up the blue LED permanently and see if the hardware is ok. (echo
>> 0 to
>> switch back off)
>> But if you ever see a white indicator, then the blue LED is definitely ok,
>> no
>> need for that test.
>>
>> HTH
>> /jOERG
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.maemo.org/pipermail/maemo-developers/attachments/20100623/0bf4bf6b/attachment.htm>