[maemo-developers] Notification LED (blue color) in PR 1.2

[From: saurabh aggarwal]

Thanks, the settings of notification lights had IM notifications not
selected. The settings must have been reset during the 1.1 to 1.2 upgrade.

Fixing the settings fixed the problem.

Thanks,
-Saurabh

On Wed, Jun 23, 2010 at 4:40 PM, Joerg Reisenweber <joerg at openmoko.org>wrote:

> [saurabh aggarwal Mi  23. Juni 2010]:
>  > Looks like it is no longer working. I tried with the dbus command that
> used
> > to work with PR 1.1 (http://wiki.maemo.org/Phone_control#Deactivate_LEDs
> ),
> > and it doesn't work. I also tried sending an IM message to the native IM
> > application, and even that didn't turn the blue LED on.
> >
> > Can some one confirm the break?
> >
> > -Saurabh
> >
> No, seems to work usually.
> Have you checked your indicator light settings in settings app?
> Please notice the PatternCommunicationIM blue flashing is only while screen
> is
> dim and only for IM, aiui.
> Also your link is to DEactivate_LEDs - probably a mishap.
> you could do a
> echo 50 > /sys/class/leds/lp5523:b/brightness
> to power up the blue LED permanently and see if the hardware is ok. (echo 0
> to
> switch back off)
> But if you ever see a white indicator, then the blue LED is definitely ok,
> no
> need for that test.
>
> HTH
> /jOERG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.maemo.org/pipermail/maemo-developers/attachments/20100623/ae19ca70/attachment.htm>