[maemo-users] N800 Disk Full? Erratic Behavior

[From: Peter Bart]

Hello Everyone,
	I have an N800 that appears to have one of the mount points at 100%.
Would this cause erratic behavior, such as Claws not being able to write
to log files, retrieving the same email multiple times, other programs
exiting abruptly, the AP complaining about not enough memory at target
location for an update, etc? Following is the output of df, sadly I am
at a loss about what to do next. I have deleted a large number of
programs; that used a lot of memory; I have never used. I have also
moved document storage from device memory to one of the memory cards.
That has reduced the mount points at 100% from three to one. Is there a
solution for me, besides reflashing and being more careful with what I
put where?

BusyBox v1.4.1 (2007-03-12 19:00:25 EET) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.4.1 (2007-03-12 19:00:25 EET) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # cd /
/ # df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock4            2.0M      2.0M         0 100% /mnt/initfs
none                    512.0k     68.0k    444.0k  13% /mnt/initfs/tmp
/dev/mtdblock4          251.5M    202.2M     49.3M  80% /
none                    512.0k     68.0k    444.0k  13% /tmp
none                      1.0M     60.0k    964.0k   6% /dev
/dev/mmcblk1p1          120.0M    784.0k    119.3M   1% /media/mmc1
/dev/mmcblk0p1          979.2M    389.5M    589.6M  40% /media/mmc2

Best Regards,
-- 
Peter Bart <peter at petertheplumber.net>
http://petertheplumber.net